Jump to content
Corsair Community

can't get 2 pairs of TWIN2X4096-8500C5D to run 1066mhz


reward20

Recommended Posts

I work on desktop work boxs so this is my 1st game box.:D:

so memeory timing and duel channel are new to me. The over clocking stuff in cmos is new to.

 

The OS is vista 64 bit

I have two 4G packs they run at 800Mhz not 1066Mhz.

The timing is set the cl,trcd,trp 5 then tras 15.

The mobo is overclocked to 2.5Ghz.

 

The xfx nforce 750a is overclocked on a stock 8450 triple core chip would that i give the problems with the dominator twin2X4096-8500CD5D 4G (total 8G)?

 

The mobo is full does that mean no duel channel? I read in ASUS that that there mobo could only support 2 duel channel sticks due to the limits of AMD chips.

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...