W4c Posted March 26, 2004 Share Posted March 26, 2004 I got mobo ga 7n400 pro2 and Corsair TWINX512-3200C2PT 2*256mb. Pc wont boot up in dual channel config. Its work only with memory in 1st and 2nd slots( single chanel) and in 1st and 4th it boot up, but recognize just 256mb. Other possible configuration doesn`t boot. cpu 2600xp vga all in wonder 9800 pro hd 2*80gb maxtor, 1* wd 120 Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 26, 2004 Corsair Employee Share Posted March 26, 2004 If the memory will run and pass [url]www.memtest86.com[/url] in single channel and see the full 512 Meg; but will not run properly when in dual channel mode or will not see the full 512 Meg 2-256 Meg modules. That would be a MB problem, and I would submit the MB for RMA. In addition, with this CPU you should run the memory Freq at 100% so it's in sync with your CPU! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.