Jump to content
Corsair Community

question for cm72sd1024rlp-2700/s


Recommended Posts

I have asus k8n-dl with dual amd opteron 270 and 4 cm72sd1024rlp-2700/s modules....and with xp 64 bit


corsair say:

tcl 2.5

trcd 3

trp 3

tras 7

timing 2T


i set this param on bios and when I'm launching PC on the bootstrap screen say ddr 400 2.5-3-3-7-1T ... then everytime I go on bios timing is changed on 1T ....


And Other....

My friend have the same PC (we both togheter at the same time), he has the same mother, the same processor, the same OS and the same memory


His setting are 2.5-3-3-6-1T .... He say that work ok :bigeyes:


now just my question:

what are the right setup for my machine?!?.... and is possible to set up more accurate value to have best and the top performances?!



thank you

Link to comment
Share on other sites

  • Corsair Employee
Command Rate is not really a memory setting and would be dependent on the make and model of MB and PSU and the specific CPU you have installed. You might look this setting up on Techarp and get a better explanation.

I would suggest it be set to 2t for that platform for best stability!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...