glc Posted November 25, 2007 Share Posted November 25, 2007 Hello everyone Just a quick question.Getting new ram,Twin2x2048-6400C4DHX. BTW,NewEgg has a heck of a deal going for these. If anyone has same hardware config, am wondering what I might be able to get out these. I'm pretty sure,I won't get what I have now,but then again,thats why I'm asking. This is what I have now: EVGA 680i A1 board with P31 BIOS Corsair XMS2 Twin2x1024-6400C4/running in dual channel Intel E6600 Core2 Duo (lapped) Clock Speed: 3.550 Multiplier: 8 FSB: 444 FSB clock mode: Linked FSB mem ratio: Sync FSB mhz: 1775 MEM mhz: 887.5 CPU core: 1.4875v CPU FSB: 1.3v MEM: 2.1v nForce SPP (NB): 1.3v nForce MCP (SB): 1.5v HT nForce SPP<-> MCP: 1.25v Mem Timings: tCL: 5 tRCD: 4 tRP: 4 tRAS: 12 (CMD) 2T tRRD: auto tRC: 15 tWR: auto tWTR: auto tREF: auto Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted November 26, 2007 Corsair Employee Share Posted November 26, 2007 I would keep what you have now that is a great O.C.! But if you do replace them all I can tell you would be the tested settings DDR800 at Cas 4-4-4-12 at 2.1 Volts, but you can search for these on Performance Reports and see what we were able to run them at in the lab. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.