Jump to content
Corsair Community

K8T Neo-FIS2R and 2 sticks of CMX512-3200C2


cameramonkey

Recommended Posts

I am interested in upgrading to an MSI K8T800 K8T Neo-FIS2R with an Athlon64 3200+. I currently have 2 sticks of CMX512-3200C2 in my P4 system. I was wondering if I could use this without any problems in the MSI. I saw this thread about running it in single channel an the motherboard: [url]http://www.houseofhelp.com/forums/showthread.php?t=21962&highlight=CMX512-3200c2+K8T+Neo-FIS2R[/url] But I was wondering if 2 sticks of CMX512-3200C2 would be a problem. Thanks in advance.
Link to comment
Share on other sites

  • Corsair Employees
You should be able to use these two in that MB, but you should install them in slots 1-3 and set the Dim Voltage to 2.7 Volta and please try setting the timings to what’s suggested for 2 single XMS3200C2 modules, or Cass 2.5-3-3-7. Also, please make sure that you have the latest bios from MSI as well.
Link to comment
Share on other sites

  • Corsair Employees
LOL! Well let us see if there is a problem first, then if we can’t make it work with what you have we can make a determination as to what would be the best corrective action. However, I have faith it will work.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...