Jump to content
Corsair Community

Chaintech ZNF3-150 and CMX512-3200C2PRO


Recommended Posts

I have the Chaintech ZNF3-150 mobo and a stick of the CMX512-3200C2PRO. The problem I have that you have hit reset about 3-4 times to get the PC to boot since it will lock up after the IDE drives load. Also, it will lockup on reboot (after windows shuts down and before memory settings are shown). I have tried all 3 bios releases and am currently running the latest version (3.0). I have also changed the voltage setting to 2.7 but it had no effect. After going back and forth with Chaintech tech support, they feel it is the memory that is causing the problem. I have read in some amdmb forums that 3500 speed ram was recommended to others by Chaintech support. I purchased 512mb of 3500 speed last week and it works just fine with no problems by itself. I now have the 3500 in slot 1 and 3200 in slot 3 and experience the same lock up problems. Is there anything I can do to get the 3200 stick to work without lock ups?
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...