Jump to content
Corsair Community

Twin2x1024-5400c4


alicante

Recommended Posts

  • Corsair Employees
Yes but you will need to be running an 800 or 1066 FSB CPU and just load setup defaults and then set the memory Voltage to High and set the tested settings and you should be good to go. However I would suggest using VS2BGkit667D2 with that MB or VS2GBkit533D2 for best compatibility.
Link to comment
Share on other sites

Thanks for answer,

yes i have an 800mhz speed.(Pentium® Processor Extreme Edition 840)

 

I make default (cmos).

But I come not to the BIOS . No Beep , nothing.The Board is new

The cooler its going on.

 

What can I do.

Sorry for my bad english.

Thanks

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...