DarkFury Posted July 30, 2007 Share Posted July 30, 2007 Is the Corsair TWIN2X2048-6400C4DHX memory compatible with this motherboard? I've seen in other threads that folks are being recommended to use the TWIN2X2048-6400C5DHX memory, but isn't the lower latency on the 4DHX better? Thanks in advance for your advice on this.... since I am on the verge of purchasing, but don't want to make a grave mistake (since I hear that the Striker is a very picky mobo when it comes to memory.) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted July 30, 2007 Corsair Employee Share Posted July 30, 2007 100% compatible!! Link to comment Share on other sites More sharing options...
vistafab Posted September 3, 2007 Share Posted September 3, 2007 Hello I must again-speak or I need an advice I have this memory with 4 GB in the Asus Striker extreme most current Bios 1303 The attitudes are 4 4 4 12 Timing 2 no operating system can install for BSOD and memtest breaks with 2gb with 99% off to be able it to me to help This message is for Ram Guy Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 4, 2007 Corsair Employee Share Posted September 4, 2007 Are you running the memory frequency at DDR667 and have you tried to do the install with 2 gig? And what do you have the memory Voltage set to, I would suggest 2.1 Volts with 4 modules. Link to comment Share on other sites More sharing options...
vistafab Posted September 4, 2007 Share Posted September 4, 2007 Hallo Ram Guy no i have already run the modules with 800 mhz and 2.1 Volt, why are this problematic situation does modules not on all motherboards runs, the shop men is testing the memory in other boards, the moduls are ok, i Hope when i use this moduls i have a stable System with the Motherboard but I think i must buy a other MB or other mainboard Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 4, 2007 Corsair Employee Share Posted September 4, 2007 There is more loading on the system when you have it fully loaded and that is normal to have to run a bit slower for that reason. Just please try it and see. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.