vashables Posted April 24, 2007 Share Posted April 24, 2007 I bought 2 sticks of 1 gig CM2X1024-6400PRO I need a RMA number. I start my computer up and I get blue screens and other issues concerning restarts. I tried both sticks or ram seperatly and only one of them gives me problems. I ran memory tests and one of them fails. The other runs great. :biggrin: please replace Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted April 25, 2007 Corsair Employee Share Posted April 25, 2007 Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.0 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you have to disable legacy USB in the bios when running any memory test Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.