Vroc Posted April 14, 2007 Share Posted April 14, 2007 Computer shut down and would not restart, trouble shot it down to one stick of my 3200pt. Started right up and worked fine with the bad stick removed. What do I do now and how do I go about getting a rma for new memory? I have had it for over a year. Thx for any help. V Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 16, 2007 Corsair Employees Share Posted April 16, 2007 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200 Cass 3-3-3-8 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.