Jump to content
Corsair Community

Bad Set memory


Rogerdoger40

Recommended Posts

Memory stick bad, Windows will not boot if I have thses sticks in MB, I tested them with memtest and I am getting errors as soon as test starts.

 

CMX512

 

8-3-3-3.0

 

I had no problem before. I have 4 sticks of 512 when I install 2 in dual mode PC works find when I install the other 2 PC won't boot to windows and I get errors on memtest the other 2 no errors, when I put all 4 sticks no boot and errors on memtest. Am I suppose to post this here for RMA or am I in the worng place? all four are the same brand

Link to comment
Share on other sites

  • Corsair Employees
Please load setup/optimized defaults and then set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS3200 Cass 3-3-3-8 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with http://www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...