headspinning Posted September 9, 2006 Share Posted September 9, 2006 hi there could anyone help me. I have an athlon64 3500 in a k9n neo board, 2 x vs512mb533d2. Maxtor 200gb sata 2, Geoforce 7600gt, Pioneer DVR111 Bios ver 1.30 Machine booted ok, loaded windows xp no problem. Loaded drivers ok, but it is so unstable. Almost constantly freezing Could you suggest any manul timings for the memory which might help Many thanks Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 12, 2006 Corsair Employee Share Posted September 12, 2006 I would check for the latest bios and then load setup defaults and set the memory Voltage to 2.1 Volts and test the modules one at a time with http://www.memtest.org. Link to comment Share on other sites More sharing options...
headspinning Posted September 15, 2006 Author Share Posted September 15, 2006 Thanks for the advice Once I upgraded to bios ver 1.3 the system was rock solid Many thanks again Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted September 16, 2006 Corsair Employee Share Posted September 16, 2006 Good Deal thanks for letting me know I am sure it will help someone else with the same MB. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.