frankee Posted June 8, 2006 Share Posted June 8, 2006 I've got big problems running my Corsair Twinx 3200 C2PT (2x512) with DFI Lanparty Expert mobo and AMD Athlon X2 4200+ . My settings are 2,5-3-3-6 and voltage 2,74 as suggested. My comp won't boot in any configuration different than single channel (1 and 2 dimm). Only after it runs for about 15 minutes and gets warm (?) am I able to put the sticks in normal dual channel config and boot without an error. Memtest passed, both modules. Sometimes after normal windows reboot I get an error beep, reboot again and works fine. Plus system stability issues, occasionaly crashes and reboots. Tried optimal settings in bios, than switched to recommended settings manually. Nothing changes. Any help appreciated Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 9, 2006 Corsair Employee Share Posted June 9, 2006 That might suggest a MB and or PSU problem, I would suggest testing the modules in another known working system to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.