DinoRex Posted May 12, 2006 Share Posted May 12, 2006 Hi I had two xms-512cm32 pc3200 dual channeled for about a year. Well, recently I took one out because I wanted to do some testings but changed my mind and just put it back on.. well, now my board won't detect them as 200mhz! it won't accept it. Either I set it to 166 or the computer won't boot! and all I did was just take one out and put it back in on the same spot. Please help I've tried a lot of things; re-arrange, voltage change and so on but my board just won't detect them at 200 speed. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted May 12, 2006 Corsair Employee Share Posted May 12, 2006 Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.