renne Posted February 9, 2006 Share Posted February 9, 2006 Hello, I have recently tested my memory because i was getting lock ups and blue screens at appereantly random moments. I used the progrem MemTest86 and it showed a lot of errors when testing one of the modules (Corsair ofcrouse). I have already performed a lot of additional tests like reinstalling Windows and updating drivers/BIOS. Any ideas on how i should procede? Thanks in advance, Renne Link to comment Share on other sites More sharing options...
Kathy Bauer Posted February 9, 2006 Share Posted February 9, 2006 How can I get a replacement for the cover for my Flash Voyager flash drive from Corsair? My three year old took an interest in it and now it has disappeared. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 9, 2006 Corsair Employee Share Posted February 9, 2006 renne Can you tell me our modules part# (How To Read the Memory Label) and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Kathy Bauer Please send an email request to jackflash@corsairmemory.com, please next time start your own thread its not nice to try to take over someones post. Link to comment Share on other sites More sharing options...
renne Posted February 16, 2006 Author Share Posted February 16, 2006 Dear RAM guy, Sorry for the late reply. My motherboard is an Asus P5AD2E Premium. My CPU is an Intel 560J 3.6GHz with a 800 FSB. My BIOS settings are at default. The part number of the module is CM2X512-5400C4. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 16, 2006 Corsair Employee Share Posted February 16, 2006 Please set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have (Cass 4-4-4-12), and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with this MB you may have to disable legacy USB in the bios when running any memory test. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.