Profitteroles Posted February 9, 2006 Share Posted February 9, 2006 Hi there dont know if anyone can help but im having a bit of trouble with my new build its been restarting or freezing when ever its under load BF2 or 3d mark tests. So after speaking to a friend of mine who aslo has a dfi board he sugested updating the bios which i did and made no difference so i run a mem test over night which came up with 11,000 errors now i have no idea why its producing that many errors or how to correct them. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 9, 2006 Corsair Employee Share Posted February 9, 2006 Please set the Dim Voltage to 2.7X volts (+.2 Volts W/Giga-Byte) and then set the timings manually to the tested settings for the specific module you have, XMS2700C2 Cass 2-3-3-6 for example or if you have Value Select "BY SPD" and then test the module/'s one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.