n4k4n0 Posted February 2, 2006 Share Posted February 2, 2006 I have a problem, because i from Brazil, and the address for RMA is in USA. So the cost is very high. I need a solution. Thx Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 2, 2006 Corsair Employees Share Posted February 2, 2006 Can you tell me the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? And what is the make and model of your PSU? Link to comment Share on other sites More sharing options...
n4k4n0 Posted February 3, 2006 Author Share Posted February 3, 2006 I have a RMA number, is: R109769 and the process of "tsxexpress" is: 107282. CPU: FX-55 clawhammer MB: A8N-SLI DELUXE Settings: Default however, i tested with the memtest, one part separate, and she work´s very fine, but the other part do not pass in test. I tested the problem part in other computer and she do not pass in test. Configuration (other computer) CPU: Athlon XP 2600+ MB: Asus A7v8x-x Settings: Default What i make? PS.: Sorry for my bad english! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 3, 2006 Corsair Employees Share Posted February 3, 2006 Can you tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
n4k4n0 Posted February 4, 2006 Author Share Posted February 4, 2006 FX-55: Frequency: 200 CAS# Latency: 2.5 RAS# to CAS# Delay: 4 RAS# Precharge: 4 Cycle Time (Tras): 8 Bank Cycle Time (Trc): 11 DRAM Idle Timer: 16 Athlon XP2600+: Frequency: 167 CAS# Latency: 2.5 RAS# to CAS# Delay: 3 RAS# Precharge: 3 Cycle Time (Tras): 7 Bank Cycle Time (Trc): - DRAM Idle Timer: - Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 6, 2006 Corsair Employees Share Posted February 6, 2006 These modules have a minimum suggested voltage of 2.75 Volts so please set the voltage to 2.8 Volts and try these settings. Frequency: 200 CAS# Latency: 2 RAS# to CAS# Delay: 2 RAS# Precharge: 2 Cycle Time (Tras): 6 Bank Cycle Time (Trc): 14 DRAM Idle Timer: 16 2.8 Volts Athlon XP2600+: Frequency: 167 CAS# Latency: 2 RAS# to CAS# Delay: 2 RAS# Precharge: 2 Cycle Time (Tras): 5 2.8 Volts Link to comment Share on other sites More sharing options...
n4k4n0 Posted February 6, 2006 Author Share Posted February 6, 2006 Ok, But, in my FX-55 platform, the bad part do not post, and in XP2600+ get post with errors in memtest. However, the other part works very fine. And now???? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 6, 2006 Corsair Employees Share Posted February 6, 2006 Let's get them both replaced. Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
n4k4n0 Posted February 6, 2006 Author Share Posted February 6, 2006 I have a RMA number, is: R109769 and the process of "tsxexpress" is: 107282. The problem is: I live in Brazil!! And the cost of sending of these modules for the address of rma is very high. What I can make? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 6, 2006 Corsair Employees Share Posted February 6, 2006 Please talk to your reseller and see if they will help you. If they will not or cannot then the only choice would be to ship them to us. Sorry! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.