sakamoto Posted February 1, 2006 Share Posted February 1, 2006 Hello. I have a Corsair TWINX1024-3200XL 1024MB (2x XMS512MB) PC-3200 DDR RAM and Im just wondering if this is compatible with DFI Lan Party LP UT NF4 SLI-DR EXPERT nForce4 SLI that Im about to purchase. Thanking you in advance, moto Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 1, 2006 Corsair Employees Share Posted February 1, 2006 Yes should run great just get the latest -2 or -3 Bios and load setup defaults and set these settings: TwinX512 or Twinx1024-3200Xl Genie BIOS/DRAM Configuration DRAM Frequency Set: 2:1 or 400MHz or 200 (if option are 133/166/200) Command per Clock: Enabled SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 2T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T And leave the rest at AUTO setting Genie BIOS FSB BUS Frequency: 200 LDT/FSB Frequency ratio: 5X LDT Bus Transfer Width: 16 16 CPU/FSB Frequency ratio: Auto PCI Ex: 100 K8 cool N’ quiet: Disable CPU VID Start Up Value: 1.55 CPU VID Control: 1.55 CPU VID Special Control: Auto Chipset Voltage Control: 1.6 DRAM Voltage Control: 2.8 All other settings are motherboards defaults Link to comment Share on other sites More sharing options...
sakamoto Posted February 1, 2006 Author Share Posted February 1, 2006 Thank you very much. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.