Jump to content
Corsair Community

adding corsair memory on a7n8x-e deluxe


Recommended Posts

I have had corsair memory sticks (twinx 2x256 ddr400 XMS c2 platinum) on my a7n8x-e deluxe for one year without any problem. I bought a new stick corsair 512 ddr400 XMSpro c2 black and when i install the three sticks togrther, my computer does not boot. The three slots and the three sticks work separately. My pair of twinx are on slot A2 (closest to the processor) and B1 and it works perfectly. But when i add the third stick on A1, no boot!
Link to comment
Share on other sites

  • Corsair Employee

You might try and manually set these settings:

CPU Freq: 166 MHz

System Performance: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

Memory Timings: Manual/User Define

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 7T

With the 512 Meg is slot one and the 256 meg modules in slots 2-3

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...