Sponge71 Posted December 28, 2005 Share Posted December 28, 2005 I just purchased a 1 GB DDR 400 memory module and put it in my machine and am starting to get blue screens. I replaced the 2x512 GB Kingston HyperX modules that were in my machine before, but was not having issues. I was not able to use the 2 Kingston with the Corsair as the system would only see the 2 Kingston at 333 Mhz. My machine currently sees the 1 GB stick at 400 Mhz, but drops to 333 and only sees the Kingston if I mix the 2. Also, this board has serious overclocking and manual adjustment capabilities, but I have everything currently set to auto. Any setting or configuration advise is greatly appreciated. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 29, 2005 Corsair Employee Share Posted December 29, 2005 You should not mix memory with this MB and or platform. Either use our modules or the other makes but not both at the same time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.