HellWalker Posted December 19, 2005 Share Posted December 19, 2005 Worked fine for almost a year. Fails memtest. System blue screens trying to install WinXP. I have swapped out all other parts with known working ones. 2 pieces of CM2X512-5400C4 in dual channel mode. I have tried each piece in single channel. Posting so I can finish the RMA form. Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 19, 2005 Corsair Employees Share Posted December 19, 2005 Please set the Dim Voltage to 2.1 volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. Link to comment Share on other sites More sharing options...
HellWalker Posted December 21, 2005 Author Share Posted December 21, 2005 Sorry, I didn't explain full. I have already done that. I have been building systems for 20 years. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 21, 2005 Corsair Employees Share Posted December 21, 2005 Please follow the link in my signature “I think I have a bad part! Or *New* Tech Support Express” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
HellWalker Posted January 6, 2006 Author Share Posted January 6, 2006 I got a reply from Corsair promising a RMA for my memory kit. It has been 2-3 weeks and still....I wait. Please get the RMA sent my way. I lose patience. HW Link to comment Share on other sites More sharing options...
HellWalker Posted January 7, 2006 Author Share Posted January 7, 2006 I have submitted a new request using the new express method. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.