Jump to content
Corsair Community

BSOD with twinx


Recommended Posts

Hello !

Since few days, I've got problems and BSOD with my RAM.

After a (short) night of memtest, I've got errors after 6 pass.

I have not tested part alone, but I've got to send my two parts so is it necessary to test parts one by one ?

Thank you, and sorry for my bad english !


My ram : two DDR CMX512 XMS3200.


PS : what is module part number ? Where can I find it ? What does it like ?

Link to comment
Share on other sites

  • Corsair Employee

The part# would be CMX512-3200 if that is what you have.

Please set the Dim Voltage to 2.7X volts and then set the timings manually to the tested settings for the specific module you have, and then test the module/modules one at a time with www.memtest.org! If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure.


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...