3degree Posted December 7, 2005 Share Posted December 7, 2005 I was considering adding memory to my system...... From what I remember reading here in the forums in the past, I would need to put a 1gb stick in slot 3 and run the 2x512 in slot 1 & 2. What memory should I use for this? I'm not seeing a single matching XLPT 2-2-2-5 1gb stick...... What is acceptable to put in with this setup for a Abit NF7S V2 board? Link to comment Share on other sites More sharing options...
3degree Posted December 9, 2005 Author Share Posted December 9, 2005 ?????????? Link to comment Share on other sites More sharing options...
RJLeong65 Posted December 9, 2005 Share Posted December 9, 2005 Unfortunately, there has never been a 1GB 3200XL module. In addition, the 3200XL memory now comes only with a black heatspreader or in the "PRO' version with LEDs. The XLPT was recently discontinued. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 10, 2005 Corsair Employees Share Posted December 10, 2005 I am sorry but RJLeong65 is right we do not offer a 1.0 Gig XMS3200XL module and if you try and mix memory the system may not post. I would suggest you replace what you have now with one Twinx2048-3200C2 set of modules for best performance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.