jeekflit Posted June 7, 2005 Share Posted June 7, 2005 are they compatible to each other? i got several crashes on dual channel setting and fewer on the single one... any idea? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 7, 2005 Corsair Employee Share Posted June 7, 2005 Can you tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
jeekflit Posted June 7, 2005 Author Share Posted June 7, 2005 i set it all to default Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 7, 2005 Corsair Employee Share Posted June 7, 2005 Please make sure that you have the latest bios and then set the Dim Voltage to 2.0 Volts and test the modules one at a time with http://www.memtest.org. Link to comment Share on other sites More sharing options...
jeekflit Posted June 8, 2005 Author Share Posted June 8, 2005 how to set up the dim voltage? Link to comment Share on other sites More sharing options...
jeekflit Posted June 8, 2005 Author Share Posted June 8, 2005 ive checked the memory... with memtest per module and it came out ok no problem... i run with single memory and work out ok... but if i plug 2 it will freeze right away (few mins with dual channel config and 30mins more with single channel config) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 8, 2005 Corsair Employee Share Posted June 8, 2005 Under Jumper Free you would set AI Over Clock Tuner to Manual and then set the Dim Voltage to 2.0 Volts. Link to comment Share on other sites More sharing options...
jeekflit Posted June 9, 2005 Author Share Posted June 9, 2005 problem solved thanks a lot man ;) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 9, 2005 Corsair Employee Share Posted June 9, 2005 No problem, please let me know if you have any more questions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.