Ker J Posted January 22, 2021 Share Posted January 22, 2021 Hello, I have a MSI Z490 gaming plus with a CPU cooler MSI 240 controlled by MSI dragon center. My case is a Corsair ICUE 220T with 4 fans case Corsair RGB controlled by the controller it came with. It was working perfectly well until i changed my GPU for an AORUS RTX 3070 Gigabytes. At the first start after installing my new GPU i noticed the fans case RGB wasn't working(running without RGB) even without installing any software for it. So i checked in my case for the connections and noticed no issue with it. Still the same than before so it should work. This GPU is coming with AORUS engine and RGB fusion 2.0 so i assume there is an issue/conflict between those softs and ICUE. Any idea how i could fix this ? Best regards Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted January 22, 2021 Corsair Employee Share Posted January 22, 2021 The issue is being caused by you also running additional third-party software that attempts to control all RGB in a case. You can try going to Settings in the iCUE software and disabling Plugins and the SDK to see if that resolves the issue. If not you will either need to disable or remove Dragon Center, MSI Mystic Light, and RGB Fusion. You also may need to then go into the iCUE software and set the appropriate hardware lighting effect. Link to comment Share on other sites More sharing options...
Ker J Posted January 22, 2021 Author Share Posted January 22, 2021 Thanks for responding... Yea i saw some posts related to this situation. I suspect RGB fusion and aorus to be the cause of the issue. Regardless MSI dragon center and ICUE didnt cause me any issue before so i might look to disable RGB fusion and AORUS engine hoping i will still have some lights running on for my GPU :/ Pretty frustrating, this card came with a nice customable LCD screen :/ . Gibabytes have to work on those issues i seem to not be the first one to encounter such a situation. Best Link to comment Share on other sites More sharing options...
Ker J Posted January 23, 2021 Author Share Posted January 23, 2021 Hey there. Well after having desintalled iCUE ,Aorus engine and RGB fusion. I installed back ICUE but it still doesnt work..... The thing is that as soon i plugged my new GPU ,ICUE litteraly stopped working even without any installation of other software. I pretty frustrated :/ Link to comment Share on other sites More sharing options...
Ker J Posted January 26, 2021 Author Share Posted January 26, 2021 Hey I tried to desinstall all the softs. I did a CMOS clear and then reinstalled ICUE. Still the same my 4 SP120 fans light are off. :/ The node controller appears in ICUE and w10 though. I really dont know what to do here. I'm considering a new Windows installation. Link to comment Share on other sites More sharing options...
Recommended Posts