Carlos_cheka Posted October 9, 2020 Share Posted October 9, 2020 I bought a single LL140 fan and Lighting core node separately. When I connect all, the RGB don't work. ICUE detect the core node, and it seems to be fine, but the lights of the fan don't work. If I connect the fan on position 1 of the Core Node, none of the LEDs light up, and if I connect it to any of the other 5 connectors, only 1 green LED lights up, but nothing else happens. Are LL fans not compatible with the Core Node? Do I need a Lighting Core Pro? Or rather it seems that the fan is defective? Link to comment Share on other sites More sharing options...
DevBiker Posted October 9, 2020 Share Posted October 9, 2020 First, it does have to be on port #1. Second, did you configure the Lighting Node Core for a single LL fan? You need to configure the LNC and tell it how many and what type of fan you have connected. Link to comment Share on other sites More sharing options...
Carlos_cheka Posted October 9, 2020 Author Share Posted October 9, 2020 Inside ICUE I have configured the LCN, putting that it is LL fans and that it is only one. Apparently inside ICUE everything is fine, I can choose what type of RGB animations I want and they are shown in the interface, but the fan does nothing. Link to comment Share on other sites More sharing options...
Recommended Posts