Flytrapp Posted March 22, 2020 Posted March 22, 2020 Hi, I have had the commander pro running for a few months now and the performance is way better than using the onboard setup. But the other day when I wanted to change a fan curve it didn't show up in iCUE. The fants/pump work as they always have, but nothing showing in icue. restarted icue, reinstalled icue but no luck. Running version 3.26.95.
5mall5nail5 Posted March 23, 2020 Posted March 23, 2020 3.26.95 is causing me TONS of issues with Commander Pro. My Commander Pro shows up, but my actual fans will just go missing so I can't apply profiles, etc. It's a bad version. Rolling back as we speak.
Baio Posted March 23, 2020 Posted March 23, 2020 Hi, I have had the commander pro running for a few months now and the performance is way better than using the onboard setup. But the other day when I wanted to change a fan curve it didn't show up in iCUE. The fants/pump work as they always have, but nothing showing in icue. restarted icue, reinstalled icue but no luck. Running version 3.26.95. Did you try to unplug and plug back again the USB header? Obviously when the pc is powered off. I'd try to switch off, unplug, power on, open iCue, exit Windows, power off, plug USB back again and see if it's recognized again. Baio
Flytrapp Posted April 30, 2020 Author Posted April 30, 2020 I think I might have found the problem, it stopped working arround the time I was working on my nintendo switch, and when using zadig to change the usb driver I might also have changed the commmander pro driver. In device manager, what drivertype does Commander pro use? Mine is showing libusb-win32 devices --> commander PRO. Thanks for any/all help
Recommended Posts