Hyperlite Posted February 20, 2020 Share Posted February 20, 2020 I have tried browsing through some of the wiring diagrams but im still a little confused. Most of the diagrams dont address the Hydro X system with more than 6 fans and mulitple led strips. Here is what i have: Corsair HX850i Power Supply 8 QL Fans 3 front, 2 pull radiator, 2 push radiator, 1 back of case I have 2 RGB LED lighting pro strips ( though i dont know if i really need both) Hydro X XC7 CPU block - Has RGB Hydro X XD5 Pump - Has RGB 4 thermal temps-came with Com Pro 1 coolant temp- for XD5 Pump I have the Corsair 680X case The case came with a lighting node pro & lighting node core( i believe) I bought 2 Commander Pro's (on accident) and another RGB hub I also have 2 more lighting node core. From what I understand, There are numerous ways to hook all this up depending on what smart devices I have. I just dont what is going to be the best and easiest. Any help is appreciated. Link to comment Share on other sites More sharing options...
DevBiker Posted February 20, 2020 Share Posted February 20, 2020 The case comes with a Lighting Node Pro and RGB Fan LED Hub. The Lighting Node Core comes with the QL-RGB fans. What I'd look at is: Commander Pro - Ch1: RGB Fan LED Hub + 5 QL Fans (Radiator + Rear) - Ch2: HydroX RGB Lighting Node Pro - Ch1: 3 QL Fans (Front) - Ch2: 2 Strips (Are you sure you have the right ones? They come in 4 packs) Put the pump thermistor in the CoPro as well as the other 3. Place them around the case - hard to exactly where right now. For the fans - get 1 powered PWM Hub. This is for the 4 QL Fans on the radiator. They all need to be the same speed so this works well. Connect this to the CoPro as well as the other 4 fans and the pump. Make sure that you specify 4-pin/PWM for both the PWM hub and the Pump. Link to comment Share on other sites More sharing options...
Hyperlite Posted February 20, 2020 Author Share Posted February 20, 2020 I have 2 packages of the rgb led lighting so 8 strips Link to comment Share on other sites More sharing options...
DevBiker Posted February 20, 2020 Share Posted February 20, 2020 Ah, well then. You can keep the suggestion above and just add an LNP just for the 12 strips. Link to comment Share on other sites More sharing options...
Recommended Posts