Jump to content
Corsair Community

Tyan 2460 fails to post

Recommended Posts

I was running a routine backup, when the system flashed a BSOD and immediately rebooted. During the reboot when the system switched into graphical mode it rebooted again. I power cycled the system, and it would not post.


I have 4 CM72SD256 R-2100 on A Tyan 2460 motherboard. I Removed all the memory from the machen, and tested each memory board using memtest. Three of the memory modules tested fine, the Fourth memory module failed to post. I repeated the test on Gigabyte GA-7DPXDW-P and achieved the same results.


I have a sneaking suspicion that the non posting chip is malfunctioning.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...