skyteam78 Posted August 20, 2019 Share Posted August 20, 2019 Hi all, I noticed that my XC7 CPU block is not fully filled with coolant. Is this normal? https://i.imgur.com/eCqgx7g.jpg Thanks Link to comment Share on other sites More sharing options...
DevBiker Posted August 20, 2019 Share Posted August 20, 2019 When first installing, it's not unusual to have bubbles. They will usually work themselves out. You can possibly speed up the process by altering the speed of the pump or leaning the case. Link to comment Share on other sites More sharing options...
c-attack Posted August 20, 2019 Share Posted August 20, 2019 Yup. Pretty much every time. Tilt the case (if possible) so the exit port is higher. The bubble will flow out and eventually drop back into the reservoir. Link to comment Share on other sites More sharing options...
skyteam78 Posted August 20, 2019 Author Share Posted August 20, 2019 Thanks guys! Link to comment Share on other sites More sharing options...
c-attack Posted August 20, 2019 Share Posted August 20, 2019 Also, in this style block and in your configuration, it likely has zero effect on temperature. However, it would annoy me just a little and certainly enough to try and work it out. Link to comment Share on other sites More sharing options...
tomcoleman Posted September 30, 2019 Share Posted September 30, 2019 i had same issue 50% trapped air , shake, rotate your case upside down etc you'll see them move when your pump is on Link to comment Share on other sites More sharing options...
Recommended Posts