ChuteBoxe77 Posted December 18, 2019 Share Posted December 18, 2019 I only signed up to confirm that it works now with the internal NZXT hub (no reconnects). Asus Prime X570 Pro Ryzen 3700X 2x16GB Corsair Vengeance White RGB Pro Corsair RM750x PSU White Lian Li PC-O11 Dynamic Window White 6x LL120 RGB White (1x Corsair RGB fan hub) 1x Commander Pro Link to comment Share on other sites More sharing options...
borange01 Posted December 20, 2019 Share Posted December 20, 2019 Same problem here. Can't believe Corsair sells such expensive RGB stuff just to have it not work. Extremely disappointing. Link to comment Share on other sites More sharing options...
TeunSteenbergen Posted December 22, 2019 Share Posted December 22, 2019 I also ordered the NZXT Hub and indeed, no flickering LED's and USB disconnect/connects anymore, nice! Link to comment Share on other sites More sharing options...
tombaker Posted December 22, 2019 Share Posted December 22, 2019 I've tried everything I can to sort this issue, i'm in the midst of a support ticket right now where they are sending a front panel usb replacement on my obsidian 500d se case, which clearly isn't the problem. Link to comment Share on other sites More sharing options...
MLGBronson Posted December 26, 2019 Share Posted December 26, 2019 (edited) This is my first pc build and I encountered this issue every one is having. Same motherboard with 6 Corsair LL120 fans and commander pro. And yes I’m having random usb disconnects as well. I thought I would make this post in hopes that Corsair can fix the issue. UPDATE: NZXT internal usb hub fixed USB disconnects! Edited January 1, 2020 by MLGBronson Link to comment Share on other sites More sharing options...
kaek Posted December 28, 2019 Share Posted December 28, 2019 Signed up to confirm: Asus x570 Prime-Pro, Commander Pro + 3x120LL + H100i. Connecting/disconnecting USB. Link to comment Share on other sites More sharing options...
sutek Posted December 29, 2019 Share Posted December 29, 2019 Signed up to Confirm random intermitant USB disconnect / reconnnects Crosshair Hero viii 570x 3900x 6x LL120 Fans 1x Corsair H150i AIO 1x Commander Pro 1 x Node Pro Commander Pro USB ports cause random disconnects on any device that gets Pluged in to them! Link to comment Share on other sites More sharing options...
teedeepee Posted January 1, 2020 Share Posted January 1, 2020 (edited) Adding my voice to the chorus. I'm also experiencing random USB disconnects/reconnects of the Commander Pro, which is connected to a USB header on my Asus Prime X570-Pro motherboard. Full PC specs under my username. I also have 6x LL120 fans and 1x Node Pro connected to the Commander Pro, and 1x Corsair H150i AIO connected to another USB header on the motherboard (and does not experience random USB disconnects/reconnects). I've unchecked the box allows Windows to put the USB port to sleep (as per an earlier suggestion) and that didn't help. Edit: I also experienced the issue mentioned by others here that the Corsair H150i AIO would not show up in iCue when connected to the Commander Pro's USB port. I had to connect the AIO directly to the motherboard instead. Edited January 1, 2020 by teedeepee Clarification Link to comment Share on other sites More sharing options...
Hi2jack Posted January 20, 2020 Share Posted January 20, 2020 I have the same problem with my Gigabyte x570 Aorus Master.... Even (Corsair) mouse and keyboard didn’t function wel. I connected them to the 3.0 USB Ports and so far working wel. But my CoPro (on internal 2.0 USB header) is disconnecting/connecting every few minutes and my RGB fans are flickering when this occur :mad: Has anyone tried to connect the CoPro to a 3.0 USB header and does it solve the problem? Jack Link to comment Share on other sites More sharing options...
ShadyPyro Posted January 21, 2020 Author Share Posted January 21, 2020 After 5 months and no fix from Corsair, i bit the bullet and bought the nzxt usb hub. issue went away immediately Link to comment Share on other sites More sharing options...
Hi2jack Posted January 26, 2020 Share Posted January 26, 2020 (edited) After 5 months and no fix from Corsair, i bit the bullet and bought the nzxt usb hub. issue went away immediately Unfortenately no answer to my questions. Purchased a NZXT hub yesterday. Expanded watercooling in order to reach and connect it to the MB usb header...rest of the day and night a leaktest. Everything ok so today testing the hub....... hope it will work for me too...... Edited January 26, 2020 by Hi2jack Link to comment Share on other sites More sharing options...
ShadyPyro Posted January 26, 2020 Author Share Posted January 26, 2020 Support came back and said it's a hardware level issue and nothing they can do about it. So they are recommending the internal header. Link to comment Share on other sites More sharing options...
Hi2jack Posted January 27, 2020 Share Posted January 27, 2020 Ok, installed the NZXT-hub..... nothing changed, still the disconnect/connect issues. Tried my mouse and keyboard on a usb 2.0 (worked fine on a usb 3.0 port) and it was crap, bad reaction and weird behavior and hardly to control... For me no solution....... At last i installed Windows 10 (there are members with a Gigabyte aorus master with no issues, so for me last option) again and guess what........ ICUE is stable now, connected my mouse and keyboard again to a usb 2.0 port and it is working fine..... :laughing::laughing:my CoPro is still connected To the NZXT-hub...... so i don’t know if the hub in the end worked or the new installation of the OS was the solution......:sigh!: Jack Link to comment Share on other sites More sharing options...
NullynVoyd Posted March 4, 2020 Share Posted March 4, 2020 Just another soul with an Asus Prime X570-Pro and a commander pro resetting USB/Lights. The NZXT hub fixed the issue for me as well. Link to comment Share on other sites More sharing options...
hkpogo Posted March 5, 2020 Share Posted March 5, 2020 I have the same issue with an asrock z170m extreme4. The commander pro works well controlling my fans and pump (custom loop). The internal usb headers don't work at all though. Pretty annoying, since I opted for this device especially because of those ports. :[pouts: Link to comment Share on other sites More sharing options...
pwnship Posted March 7, 2020 Share Posted March 7, 2020 I am also having this issue with the USB hub constantly resetting on my Commander Pro on my EVGA Z390 Dark motherboard. It's a shame because I specifically purchased the device to be able to hook my Lighting Node Core and H100i RGB Platinum to the hub due to limited USB headers on the motherboard. I'm glad I found this thread and realized I'm not the only one with the issue. I guess I'll have to buy the NZXT internal USB hub to get everything to work. Hopefully Corsair is able to fix the issue without hardware replacement as it appears that the problem is driver related. Link to comment Share on other sites More sharing options...
Geowil Posted April 2, 2020 Share Posted April 2, 2020 All of you guys are ****ing life savers. I have been dealing with this **** for three months. Everything would be fine and then all of my USB devices would drop and the system audio would get jacked up before recovering. Sometimes it would take out game audio as well permanently until I restarted the game and in some cases caused games to crash. Just got an NZXT hub and crammed it into (literally) my system and hooked the CP to it and like black magic no drops now for 2 hours. Normally after a restart its happening constantly. Corsair needs to fix their ****. Link to comment Share on other sites More sharing options...
wasontilt Posted April 10, 2020 Share Posted April 10, 2020 Any updates? I'm also having this issue Link to comment Share on other sites More sharing options...
JaysonsRage Posted April 13, 2020 Share Posted April 13, 2020 I was starting to worry that I screwed up my build somehow. Going to pull the trigger on the NZXT hub to see if this solves the issues for me as well, though I suspect it will ASUS PRIME X570-Pro mobo, 6 Fans (2 of which are an the H100i), 4x16GB 3200 RGB RAM, and 4 RGB strips. Will report back either way. Have the USB connect/disconnect sound disabled for now. Link to comment Share on other sites More sharing options...
ConfigTBRZ Posted April 24, 2020 Share Posted April 24, 2020 Registered to comment that I also have this issue. Using an Asus Prime X570 PRO I am experiencing disconnects from my CoPro that is causing USB bus reset issues. Most annoying being the loss of my USB audio that requires that device to be reset. I stumbled on this thread doing some googlin' and have ordered the NZXT USB hub (actually in stock at amazon as of this post) and another manufacturer as well. I want to use the NZXT one but we'll see which arrives first. I have confirmed the disconnects a few ways, firstly, the RGB goes out on just one fan (of four) and I can see the CoPro drop from iCUE home panel. I simultaneously ran a usb even logger that also coincides its events w\ the aforementioned symptoms. Im annoyed that I invested so heavily in this ecosystem and corsair seems to ahve not been able to resolve this in the many months/years this thread and others have been active. Just to be sure, I made sure my chipset drivers were up to date and even updated to most recent BIOS. I will reply back with results after my hubs arrive. Good luck everyone. Link to comment Share on other sites More sharing options...
Gofran Posted April 27, 2020 Share Posted April 27, 2020 Hey guys i think why this happening when the pc shuts down it shuts down corsair commander and reset it i think this normal for this device other hand when restart pc it saves but when shut down pc it resets So when i use nzxt hub and shut down the pc nzxt hub light is still on So this what i am wondering i f somoene whants to try it out get a sata to molex i think it wil then not shutdown and reset Link to comment Share on other sites More sharing options...
wasontilt Posted April 27, 2020 Share Posted April 27, 2020 Hey guys i think why this happening when the pc shuts down it shuts down corsair commander and reset it i think this normal for this device other hand when restart pc it saves but when shut down pc it resets So when i use nzxt hub and shut down the pc nzxt hub light is still on So this what i am wondering i f somoene whants to try it out get a sata to molex i think it wil then not shutdown and reset Interesting but I never shut down my computer and I still have the USB disconnects. Link to comment Share on other sites More sharing options...
ConfigTBRZ Posted April 27, 2020 Share Posted April 27, 2020 The NZXT hub has not arrived but its equivalent did: https://www.amazon.com/gp/product/B07QHQF92K/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Preliminary results: No disconnects yet; see iCue log excerpt: 2020-04-27T16:15:11 I cue.devices: Device insertion processing complete for Commander Pro (vid=1b1c, pid=c10) The above is the initialization completing. Prior to using the hub, you could search the log file for device insertion and see it re-initializing repeatedly. So far so good as this event has not re-occurred in the 30 mins I've been gaming. Albeit, more testing is required, but prior disconnects were pretty frequent. Notes: This hub uses SATA power while NZXT apparently uses molex\4-pin. which is nice. Also, power is not really required if just running CoPro off it, it will draw sufficient power from MB USB head. I will connect SATA power if perhaps drops occur again just to rule that out. Also, build quality on this did far exceed what I expected. I was apprehensive about putting it into my build with thousands of dollars worth of gear until I saw how decently it was made. I will update later this week if issue has fully resolved after I've had more time to test real use. Link to comment Share on other sites More sharing options...
ConfigTBRZ Posted April 28, 2020 Share Posted April 28, 2020 Still stable after five hours uptime. iCue logs only show initial insertion listed in above post. USB logger left running shows no unplug/plug events. Will continue to monitor overnight Link to comment Share on other sites More sharing options...
ConfigTBRZ Posted April 28, 2020 Share Posted April 28, 2020 (edited) Still stable after five hours uptime. iCue logs only show initial insertion listed in above post. USB logger left running shows no unplug/plug events. Will continue to monitor overnight No USB events logged overnight, iCUE logs show no drop of CoPro either. Looks like an internal USB hub IS the fix. But that begs the questions; why and how? Ive been in C.S. my entire adult life, primarily network engineering and the only thing I can think of is that maybe the USB traffic through the hub is somehow encapsulated or something? Just really struggling to understand at a layer I, layer II level how this is working. ***Update*** 24hrs uptime with no drops. confirmed via USB event viewer tool and reviewing iCue logs. Edited April 28, 2020 by ConfigTBRZ Link to comment Share on other sites More sharing options...
Recommended Posts