trojax Posted March 16, 2005 Share Posted March 16, 2005 I have dual 1.8ghz powermac G5,I dont know the CAS latency and the volt req. on my systems,and i just found a good deal on corsair memory [VS1GBKIT400] but I doubt it will work on my G5 [8 slots DDR],because it's not listed on corsair website.Can anyone help me?And what happened if I mixed them with the standarrd 512mb that I got when i purchased the systems? Thnk's Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 16, 2005 Corsair Employee Share Posted March 16, 2005 If you want to add to the modules that came with your system, I would suggest you use the modules we suggest in our Memory Configurator CMSS512MB-400 Link to comment Share on other sites More sharing options...
trojax Posted March 17, 2005 Author Share Posted March 17, 2005 If you want to add to the modules that came with your system, I would suggest you use the modules we suggest in our Memory Configurator CMSS512MB-400 And what is the CAS,the voltage req. for that module?I seems to have trouble finding the module spec...and what about the standard module that come when i bought my systems?is it CAS 3?what happened if I mixed them out with CAS 2? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 17, 2005 Corsair Employee Share Posted March 17, 2005 The system may not post or run properly if you mix modules. And our System Select module would be built to the specific manufacturers spec. Either Cass 3-3-3-8 or Cass 3-4-4-8. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.