AskN0More Posted September 29, 2018 Share Posted September 29, 2018 Hello I just grabbed 1x LL120 as exhaust fan and commander pro. Soon i will have 4x rgb led strips from corsair too.. Problem is, LL120's leds are not showing up. Only 1 led is flashing in the center. link or icue cant control leds. never responds. I borrowed a hd120 from a friend and i can control it without any problem. Corsair commander is connected to motherboard usb header. Rgb fan led hub is connected to commander pro's 1st led channel. and i connect fan to rgb fan led hub on 1st port. I tried some versions of link and also i am at latest firmware of commander pro. Any suggestions? thanks Link to comment Share on other sites More sharing options...
AskN0More Posted September 30, 2018 Author Share Posted September 30, 2018 Noone to advice? Link to comment Share on other sites More sharing options...
DevBiker Posted September 30, 2018 Share Posted September 30, 2018 If you can control the HD120, then it's possible that your LL120 is bad. Link to comment Share on other sites More sharing options...
AskN0More Posted September 30, 2018 Author Share Posted September 30, 2018 If you can control the HD120, then it's possible that your LL120 is bad. Thanks for answer I think its bad product too but i wanted to have your idea before i rma it to see if there is something to do to fix. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts