saint__aries Posted April 14, 2020 Share Posted April 14, 2020 So what you need to do: i edit it only for M65 PRO 1: Unplug your mouse from the computer. 2: Locate the small pinhole underneath your mouse. For some, this will be located directly on the bottom in plain sight. On others, it will be located underneath one of the removable weights attached to the bottom of the mouse. ( THE TOP RIGHT ) 3: Using a small paperclip or push-pin, press down on the button inside the pinhole. 4: Plug your mouse back into the computer, while holding down the pinhole button. 5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this. 6: Download the files from the link below. 7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in it’s name to the CRP_Disabled drive. 8: Once you have performed the steps above, please unplug your mouse and then plug it back in. The device will then return to normal. I have the files for M65, https://files.fm/u/xpzdp5m8 !!! (ALL COME FROM CORSAIR, NOT ME) the file is not avaibable can it be reuploaded please Link to comment Share on other sites More sharing options...
saint__aries Posted April 14, 2020 Share Posted April 14, 2020 can you reupload this please Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Nick Posted April 15, 2020 Corsair Employee Share Posted April 15, 2020 We have the firmware files available to send to you through our support portal. If you put in a ticket, one of our Technical Support members can identify which specific mouse you have, and ensure the correct file is sent to you. https://support.corsair.com/ Link to comment Share on other sites More sharing options...
fredd0 Posted September 10, 2020 Share Posted September 10, 2020 add me to the list... this seems WAAAAAY too common... i submitted my ticket but is this something i should expect? not cool at all. i have a k95 platinum (and each of my two boys have one as well), 4 QL fans, the m55 mouse, and 4 RGB memory sticks. should i be afraid of upgrading firmware? Link to comment Share on other sites More sharing options...
antech Posted October 7, 2020 Share Posted October 7, 2020 Mine also no longer is working, guess my chipset wasn't one of the tested hundreds of times. Mine K63 is now seen in iCue but does not show version, battery, etc and wireless dongle does not work, when plugged in, a new drive with CRP DISABLED comes up. I cannot upgrade firmware, stucks at 0%. I could only use with wire and bluetooth. I guess my keyboard chipset also not on the list too. Link to comment Share on other sites More sharing options...
Recommended Posts