vanvock Posted February 11, 2005 Share Posted February 11, 2005 Hi, I'm building a DFI Ultra-D(939) board & bought some TWINX1024-3200C2 for it thinking it was cas2 then found out that was on Intel boards & it's rated at Cas2.5 on AMD's. Is there a chance it will run at Cas2 on this board. Anyone tested it on a NF4 MB? Can you tell me what chips & board were used on these sticks? The #'s are: CMX512-3200C2, XMS3202v5.1,& lot #0502065-5. The cpu is 3000+ Winchester. Thanks for any help. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 11, 2005 Corsair Employee Share Posted February 11, 2005 Actually most of the AMD 64 MB's we have tested have been able to run at Cass 2-3-3-6 with XMS3200C2. However, we would not be able to offer a gaurentee. I would just try it and if you need help please let us know! Link to comment Share on other sites More sharing options...
vanvock Posted February 12, 2005 Author Share Posted February 12, 2005 Actually most of the AMD 64 MB's we have tested have been able to run at Cass 2-3-3-6 with XMS3200C2. However, we would not be able to offer a gaurentee it. I would just try it and if you need help please let us know! Thanks for the reply. Is that at 1T? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 14, 2005 Corsair Employee Share Posted February 14, 2005 Yes with 2 modules you may be able to set the Comand Rate to 1T. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.