Jump to content
Corsair Community

Upgraded - Problems Now


Recommended Posts

I just upgraded to some corsair ram, CMX512-3200C2. 512x2


I was running on noname 512 before and games and such ran fine, now i get some choppiness and strange freezes... wondering if someone could help out and give me some suggestions. here is my info;



MB: Abit AG8

Processor: Intel Prescott 3.00GHz


Not too sure on what youll need but here it goes


CPU Ratio: 15.0X

Ext Clock: 204 MHz

PCI Clock: 33.33 MHz

VCore: 1.3875V

DDRV: 2.70V

NBV: 1.50V



Phoenix Technologies, LTD

Version 6.00 PG

DoM: 9/22/2004


I really dont know what else you guys will need, I'll check daily. Thanks in advance.

Link to comment
Share on other sites

  • Corsair Employees

Please check for the latest bios and then load setup defaults and set these settings manually and test the modules one at a time with http://www.memtest.org.

Dim Voltage to +2.7 Volts:

CAS Latency CL=2.5

Ras# to CAS# delay tRCD 3

Min Ras# Active Time tRAS 6

Row Precharge Time tRP 3

Then test the system with http://www.memtest.org and make sure it's stable!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...