nnihiltor Posted January 27, 2005 Share Posted January 27, 2005 My memory module is cmx512-3200c2pro. Even though my memory module is rated @ DDR400 for AMD systems at 2.5-3-3-7. When i memtest it @DDR333 get 1073 errors posted on the single ram stick. I want to get my RAM returned for a new replacement? What do I do? (I am running an AMD 2500+ system on an Albatron KX18D Pro II motherboard and stock voltages.) @nnihil@tor Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 27, 2005 Corsair Employee Share Posted January 27, 2005 Please try and load set up defaults and then set the following settings in the bios manually: CPU Freq: 166 MHz Memory Frequency: 100% Dim Voltage to 2.7 Volts Resulting Frequency: 166 MHz SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T Then please test the module with http://www.memtest.org to make sure its stable! Link to comment Share on other sites More sharing options...
nnihiltor Posted January 28, 2005 Author Share Posted January 28, 2005 Ive tried the above settings, setting everything to deault and adjust the requested settings and I get errors within 15 minutes of testing. I really think I have a bad module. Can I get an RMA? Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted January 28, 2005 Corsair Employee Share Posted January 28, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.