lafouine Posted December 29, 2004 Share Posted December 29, 2004 hi , i have a big problem, hi have 2 x 512 cmx512-3200c2 i have always blue screen, i have make test with memory86 and at the test 7 [Random number sequence] i have 2300 errors !!!! in 10 mins. i have test each memories separatly and its the same. i have change the ram in the bank and always the errors. i have test with cas 2 2 2 5 ( i have test all the cas) with volt 2.75 vga volt 1.7 etc etc etc. thanx for your answer, and sorry for my english, i'm french. ;-) this is ma hardware config. processor : Intel Pentium 4HT, 3033 MHz (3.75 x 809) Mobo : Chaintech 9CJS ZENITH [/b] (5 PCI, 1 AGP, 1 CMR,4,DIMM, Chipset mobo : Intel Canterwood i875P Memory system : 1024 Mo (DDR SDRAM) BIOS : Award (10/18/04) ------------------------------------------------------------------------- manufactured Intel Version Intel® Pentium® 4 CPU 200 MHz 3066 MHz 3000 MHz Type Central Processor Voltage 1.3 V socket Socket 478 CPU Properties: CPU Type Intel Pentium 4HT, 3033 MHz (3.75 x 809) CPU Alias Northwood HyperThreading CPU Stepping D1 Original Clock 3000 MHz L1 Trace Cache 12K Instructions L1 Data Cache 8 KB L2 Cache 512 KB (On-Die, ATC, Full-Speed) CPU Physical Info: Package Type 478 Pin uPGA Package Size 3.50 cm x 3.50 cm Transistors 55 million Process Technology 6M, 0.13 um, CMOS, Cu, Low-K Die Size 131 mm2 Core Voltage 1.475 - 1.55 V I/O Voltage 1.475 - 1.55 V Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 29, 2004 Corsair Employee Share Posted December 29, 2004 XMS3200C2 should be set to Cass 2-3-3-6 at 2.75 Volts, please test them at that setting one at a time with http://www.memtest.org. Link to comment Share on other sites More sharing options...
lafouine Posted December 30, 2004 Author Share Posted December 30, 2004 hi, thx for your answer i have already test at Cass 2-3-3-6 at 2.75 .. Its the same problem. Link to comment Share on other sites More sharing options...
lafouine Posted December 30, 2004 Author Share Posted December 30, 2004 so ? :(: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted December 30, 2004 Corsair Employee Share Posted December 30, 2004 O.K.?? If both modules are producing errors, I would suspect that you may have another problem, and I would suggest testing the modules in another system. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.