Jump to content
Corsair Community

Black Vengeance Triple Channel correct configuration ?


Recommended Posts

Hi all


Happy owner of 4 RED Vengeance 1600 which give me great satisfaction on Asus Crosshair Formula IV mobo, I purchased second hand Black Vengeance Triple Channel Kit : CMZ12GX3M3A1600C9 12 gb . the mobo for this kit is a Gigabyte G1.Sniper Rev 1.0 with X58 Intel Chipset Socket 1366.


Whatever configuration I use :


4 Gb one Dimm socket

8 Gb two Dimm sockets

12 gb three dimm sockets


Win 10 64 bit is very unstable and bugs are occuring every now and then.


I tried many setups in BIOS ike changing the XMP, manually setup , change and lower to 1333 mhz, auto , well everything but it did not help


I then tried the same kit with 1,2, and 3 modules on Asus Crosshair Formula Iv mobo and the MemOk ! function.


Same issues !


So what can I do to get this kit work and if not possible what test can I run to check and see which module (or 2 or the 3) is bad ?


Memtest say all is ok !


Thanks for help

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...