Truitaman Posted October 7, 2015 Share Posted October 7, 2015 Hi all, i bought a h80i GT 1 week a go and would like to configure a custom curve, my rig is as follows: i7-4790k 16gb memory 250 GB SSD 3TB HD 980TI G1 GAMING GIGABYTE Z97N-GAMING 5 here is my issue: I saw in the forum and in other sites of internet that it's possible to setup the custom curve with temperature and rpm of the fan. Ok don't know why but mine i can't only setup temperature and % fan speed check the image below: http://i61.tinypic.com/20idimf.png Could you tell me step by step how to setup the custom Curve with Temperature / rpm? Could you tell me recommended custom curve for my rig? considering actually with default it's too noisy. Link to comment Share on other sites More sharing options...
red-ray Posted October 7, 2015 Share Posted October 7, 2015 First you need to select a Group Link to comment Share on other sites More sharing options...
Truitaman Posted October 7, 2015 Author Share Posted October 7, 2015 i tried without group and with group, nothing changes, please could you explain step by step? Now i7-4790k in the same group as well but don't appear in the grouping section: http://i62.tinypic.com/ve2p1h.png thanks for taking care and reply. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted October 7, 2015 Corsair Employee Share Posted October 7, 2015 The Group you choose needs to be the Cooler Temp. From there it should work. Link to comment Share on other sites More sharing options...
Truitaman Posted October 7, 2015 Author Share Posted October 7, 2015 The Group you choose needs to be the Cooler Temp. From there it should work. Please could you explain a little bit, this is the way i have it configured and i can't choose the option to use temperature - rpms Could you explain it, thx for taking care. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted October 8, 2015 Corsair Employee Share Posted October 8, 2015 Under the Group drop-down, select H80i GT Cooler Temp. Under Fan Mode, select Custom Curve. From there, set the temperatures and percentages you want. Note that you can't choose specific RPMs, just percentage of fan speed. Link to comment Share on other sites More sharing options...
Truitaman Posted October 8, 2015 Author Share Posted October 8, 2015 that's what i did , but i saw many snapshots in the internet with temps - rpms that's why i did ask in the forum. thx for answering. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted October 9, 2015 Corsair Employee Share Posted October 9, 2015 Yeah, that's an error on the graphing. I've actually submitted the bug internally. Link to comment Share on other sites More sharing options...
wytnyt Posted October 11, 2015 Share Posted October 11, 2015 I've always have heard mods say its best to use links main ui to set fan curves instead of the group screen,it does work better... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.