badgerbrian Posted November 24, 2004 Share Posted November 24, 2004 I have an ASUS SK8N motherboard socket 940 and an opteron chip - Will the following ram run fine on this board? Corsair - Twinx 512mb 400mhz XMS3200 R CMX512RE-3200LL ? Thanks for your time Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 24, 2004 Corsair Employees Share Posted November 24, 2004 Yes, but I would suggest you get a Twinx set of these modules or Twinx1024RE-3200LL for best performance. And if you have not got the MB yet I would suggest you use SK8V instead as it has proven to be a bit faster. Link to comment Share on other sites More sharing options...
juspatrick Posted December 9, 2004 Share Posted December 9, 2004 I have the ASUS SK8N and Twinx1024RE-3200LL At the moment things are stable and look like this: DRAM...................2.5V Memory CLK.........:200 MHz CAS Latency........:2.0 TRCD..................:3CLK TRAS..................:6CLK TRP....................:2CLK I cannot seem to find any info in my boards docs to explain to me what I should do with the ECC Configuration Setting in the BIOS. Right now I have left it at Master ECC Enable.........................[Enabled] DRAM ECC Enable...........................[Disabled] L1 Cache Background Scrub.............[Disabled] L2 Cache Background Scrub.............[Disabled] Should I enable the bottom 3 and what settings should I use? For example if I Enable DRAM ECC Enable I get the folling 3 options / settings. DRAM ECC Enable...........................[Enabled] ....DRAM Background Scrub..............[Disabled] ....DRAM SCRUB REDIRECT...............[Disabled] ....ECC Chip Kill..............................[Disabled] And can you explain a bit about these settings? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 9, 2004 Corsair Employees Share Posted December 9, 2004 DRAM...................2.7V Memory CLK.........:200 MHz CAS Latency........:2.0 TRCD..................:3CLK TRAS..................:6CLK TRP....................:2CLK I cannot seem to find any info in my boards docs to explain to me what I should do with the ECC Configuration Setting in the BIOS. Right now I have left it at Master ECC Enable.........................[Enabled] DRAM ECC Enable...........................[Enabled] L1 Cache Background Scrub.............[Disabled] L2 Cache Background Scrub.............[Disabled] Should I enable the bottom 3 and what settings should I use? For example if I Enable DRAM ECC Enable I get the folling 3 options / settings. DRAM ECC Enable...........................[Enabled] ....DRAM Background Scrub..............[Enabled] ....DRAM SCRUB REDIRECT...............[Disabled] ....ECC Chip Kill..............................[Disabled] And for an explanation of the bios settings, you can either do a search at http://www.google.com or http://www.rojakpot.com has an excellent bios setup guide that will help to answer those questions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.