Jump to content
Corsair Community

12v rail is out of ATX spec


brutuscat2

Recommended Posts

Hello, I recently opened up a monitoring application to check my system temps during a stress test, and I saw the voltage drop to ~11.5v. I took out a multimeter, and measured the 12v voltage, it varied from 11.29v (load) to 11.98v (idle). I have an AX750, and this is the second time it has had problems.
Link to comment
Share on other sites

  • Corsair Employees
Hello, I recently opened up a monitoring application to check my system temps during a stress test, and I saw the voltage drop to ~11.5v. I took out a multimeter, and measured the 12v voltage, it varied from 11.29v (load) to 11.98v (idle). I have an AX750, and this is the second time it has had problems.

 

Well... the software we know can't be trusted, but what kind of DMM are you using and where are you taking the measurement?

 

And are you actually having problems or just observing that the voltages may be low? +11.98V is more than fine, but certainly +11.29 is a bit low.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...