Bill Bentgen Posted May 26, 2016 Share Posted May 26, 2016 I have 3 monitors configured as one 5760 x 1080 workspace with NVIDIA surround for gaming and a 4th monitor above them. I open Corsair Link software on my main 3-monitor workspace and can't move it to the 4th monitor. I can drag it there, but it snaps back when I release the mouse. All other software I use will stay on the 4th monitor. I had hoped to watch temps on Corsair Link while I was gaming. Am I missing something? Link to comment Share on other sites More sharing options...
red-ray Posted May 26, 2016 Share Posted May 26, 2016 Which version of CL are you using? Link to comment Share on other sites More sharing options...
Bill Bentgen Posted May 26, 2016 Author Share Posted May 26, 2016 Corsair Link version 4.2.3.41 Windows 10 NVIDIA Driver 368.22 on GTX 690 Link to comment Share on other sites More sharing options...
red-ray Posted May 26, 2016 Share Posted May 26, 2016 (edited) I too have NVIDIA Driver 368.22 and CL 4.2.3.41 and it works fine on this W7 system with 4 x GTX 980. There was an issue that was fixed in 4.2.1.42. What are your screen coordinates and which screens have the issue? I have as below. The total width is 8640 and the maximum height is 1600. I have just managed to recreate your issue by moving #3 above #2 such that it had -ve Y coordinates. Clearly Corsair did not properly test the fix that is in 4.2.1.42 with -ve Y. Their testing is really rather pathetic :asskick:! Edited May 26, 2016 by red-ray managed to recreate issue Link to comment Share on other sites More sharing options...
Bill Bentgen Posted May 26, 2016 Author Share Posted May 26, 2016 Thanks for the time & effort you put into this. Glad in a way you duplicated the issue when you moved your #3 above #2 so that I don't have to go looking for some other issue. I'll wait for 4.2.1.43. :-) Link to comment Share on other sites More sharing options...
red-ray Posted May 26, 2016 Share Posted May 26, 2016 (edited) I'll wait for 4.2.1.43. :-) No, 4.2.1.43 should have fixed this, but it did not, Corsair messed up :(: It may get fixed in a future CL release, but only Corsair can say if it will. I assume you have worked out you could move your 4th monitor to +ve Y to circumvent the issue. Am I missing something? Given you are 8 x Seagate Barracuda ST2000Dm001 in RAID 5 yes, CL4 does not display their temperatures. Please ask for this to be fixed as I have, see http://forum.corsair.com/forums/showthread.php?p=851742. Edited May 26, 2016 by red-ray Link to comment Share on other sites More sharing options...
Bill Bentgen Posted May 26, 2016 Author Share Posted May 26, 2016 Yes. I reconfigured to make sure it would work. However, with everything else I do it's just too handy to be able to move the mouse straight up from the middle monitor. Thanks again for all of your help. Link to comment Share on other sites More sharing options...
red-ray Posted July 21, 2016 Share Posted July 21, 2016 I have just checked and CL 4.2.4.25 still has this issue. There are no CL 4.2.4.25 release notes :(:, so I have no way to know if it should have been fixed. Link to comment Share on other sites More sharing options...
red-ray Posted September 17, 2016 Share Posted September 17, 2016 I have just checked and CL 4.3.0.154 still has this issue. As Corsair lack professional diligence there is no list of outstanding known issues, so I don't know if Corsair know of this issue. Link to comment Share on other sites More sharing options...
snapper69 Posted September 21, 2016 Share Posted September 21, 2016 (edited) On a slightly unrelated issue, I recently had a 2 Tb M001 drive die (I thought through getting hot) then a 3 Tb M001 drive died as well. After some research I discovered that the M001 drives have a 32% or 38% failure rate, so I would advise you to keep an eye on your Smart monitoring software. This was followed soon after by a 3Tb M001 drive, Edited March 9, 2017 by snapper69 Link to comment Share on other sites More sharing options...
Flapinux Posted March 3, 2017 Share Posted March 3, 2017 I have just checked and CL 4.3.0.154 still has this issue. As Corsair lack professional diligence there is no list of outstanding known issues, so I don't know if Corsair know of this issue. Agreed, it's STILL an issue in v4.5.0.55 (I have dual monitor setup on a vertical stand) Link to comment Share on other sites More sharing options...
SilverminkenNet Posted March 23, 2017 Share Posted March 23, 2017 Still present i latest release 4.6.0.86 Link to comment Share on other sites More sharing options...
red-ray Posted March 23, 2017 Share Posted March 23, 2017 I just don't get why Corsair don't fix this, it can't be more then a 4 line change. No fix for http://forum.corsair.com/forums/showthread.php?p=854759 is pathetic and as I specified before to fix -ve X and fail to fix -ve Y is incompetent! When I move the CL 4.6.0.86 window to screen 3 as soon as I release the mouse it jumps back to screen two :(:. Link to comment Share on other sites More sharing options...
Foxx Posted April 5, 2017 Share Posted April 5, 2017 I too have this issue,It certainly would be nice to have this fixed. Maybe to few people complaining to warrant a fix. Link to comment Share on other sites More sharing options...
MattTheTechLV Posted June 28, 2017 Share Posted June 28, 2017 Hello All! New to posting on Forum. I have been an avid digester of this Forum Since I Picked up My Corsair K70 RGB Keyboard late Last year. Before that the last time I owned Corsair was way back in the days of DDR1, I owned a set of 1GB (Remember how That was huge back then) Dual Channel Kit For My Athlon64, and I remember Loving that ram then, I think it's still alive in storage somewhere til this day. Anyways, it's been a while since as had picked up Corsair anything until this Keyboard, and I was so damn impressed that I decided it was time to pick up some Corsair for my next set of upgrades for my Aging FX Build. So when the time came, I upgraded to a Corsair RM1000i power supply, a Corsair h100i v2 to replace my air cooling, a Link Commander Pro so I could control my 13 Fans in system in one place, and just because I just added a Lighting Node Pro to brighten things up a bit! And I love it all! And now to the point. I didn't realize this would be a problem until now, I had been using Speed fan and HWMonitor on my Bottom Screen to Monitor Temps, Speeds, and Voltages, but now that I have switched to do it all with Corsair Link, I have ran into the same problem the people on this forum have been running into for over a year now. Link refuses to be placed on my Bottom secondary Monitor, which is am issue for Monitoring Temps while working or gaming on the top screen. I am on the newest Version of Link which is 4.7.0.77 as of now. Anyone have any ideas of a temporary solution to the problem (other then having to place my monitor to the left of right in control panel)? Also it would be nice if Corsair corrected this oversight. I am going to submit a ticket, maybe once they get enough they might decide to take a look. Thank you guys, sorry to make my first post so long. Matt Link to comment Share on other sites More sharing options...
red-ray Posted June 28, 2017 Share Posted June 28, 2017 Anyone have any ideas of a temporary solution to the problem (other then having to place my monitor to the left of right in control panel)? Last time I checked the issue was with -ve Y and all you can do is make sure the screen you wish to use does not have -ve Y. It's also a PITA what CL4 fails to remember the position and size of the CL4 screen so you may also like to ask Corsair to fix this. Link to comment Share on other sites More sharing options...
Demontail Posted June 30, 2017 Share Posted June 30, 2017 Hello! I also have this issue. Cant Move the Windows with the Mouse, but works fine with "Windows+Shift+Arrows" Link to comment Share on other sites More sharing options...
red-ray Posted June 30, 2017 Share Posted June 30, 2017 Hello! I also have this issue. Cant Move the Windows with the Mouse, but works fine with "Windows+Shift+Arrows" I could not get "Windows+Shift+Arrows" to work on W7, but Alt+Space then selecting Move did :biggrin:. Link to comment Share on other sites More sharing options...
cars10 Posted July 4, 2018 Share Posted July 4, 2018 issue is still there Link to comment Share on other sites More sharing options...
ecovalence Posted July 17, 2019 Share Posted July 17, 2019 Same problem here. Link to comment Share on other sites More sharing options...
Recommended Posts