mrshrir Posted July 16, 2019 Share Posted July 16, 2019 So i would like to know if i order 6 ll fans, do i just plug them into the existing fan hub i got with my 460x that powers the sp fans ? it works out cheaper ordering 6 individual fans than getting 2 packs of 3 fans, i already have a fan hub and lnp. thanks for answering . Link to comment Share on other sites More sharing options...
DevBiker Posted July 16, 2019 Share Posted July 16, 2019 As long as you replace the push-button controller, control it from the LNP, and set the channel to 6 LL fans, you're good. The Fan Hub is an incredibly dumb device; it does nothing but distribute signal and power. The only thing in it (besides the connectors and traces) is a capacitor. Link to comment Share on other sites More sharing options...
mrshrir Posted July 16, 2019 Author Share Posted July 16, 2019 the push button control is disconnected , i replaced it with LNP when i get the LED STRIPS, so i guess im good to go, ive had sp120 for 1 half years, always wanted the LL :) amazon prime rescued me today Link to comment Share on other sites More sharing options...
Zotty Posted July 16, 2019 Share Posted July 16, 2019 Have you read the RGB Faq dude? http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
mrshrir Posted July 16, 2019 Author Share Posted July 16, 2019 yes i have / another question i have , i want to connect 6 ll fans to a commander pro, and then run another 2 ll fans and rgb strips off the 2nd channel on the commander, can i connect the LNP to the free led channel on the commander and then power the last 2 LL fans from the LNP ? if i am not mistaken , LNP has 2 rgb connections ? can you just connect a single fan to each one of them ? Link to comment Share on other sites More sharing options...
DevBiker Posted July 17, 2019 Share Posted July 17, 2019 The LNP would be connected to the Commander Pro's USB port, if anything, not the RGB channel. And yes, the LNP has 2 Lighting Channels. You cannot connect a fan directly to a LNP or CP channel directly, at least, not without a third party adapter. Link to comment Share on other sites More sharing options...
Recommended Posts