deezyG Posted May 12, 2017 Share Posted May 12, 2017 Hi guys, for the past few weeks (since I got my Corsair K70 RGB RapidFire) everytime I plug/unplug a USB (PS4 controller/Mouse/etc) my steam client freezes for a few seconds, and it happens everytime. I just recently found out that it was CUE that was causing it. If i didn't have the program open unplugging and plugging a USB was no trouble at all and didn't cause any sorts of problem. I reinstalled CUE just a few minutes ago but it still happened. Is there anyone having the same problem, and is there a fix for it? It's not much of a big deal when it really comes down to it, but it does get annoying. Link to comment Share on other sites More sharing options...
floxigen Posted May 14, 2017 Share Posted May 14, 2017 I've the issue too but as they say corsair " can't " reproduce the issue Link to comment Share on other sites More sharing options...
Xploder270 Posted May 14, 2017 Share Posted May 14, 2017 Same problem with Steam client freezing up when plugging in/unplugging a usb controller. Been having this since shortly before the creators update. Asus Z170 board (maximus viii ranger) with latest bios and drivers. Corsair Strafe (+ VOID, but problem was there before I had the VOID) Link to comment Share on other sites More sharing options...
floxigen Posted May 15, 2017 Share Posted May 15, 2017 I've strafe too and msi z270 Link to comment Share on other sites More sharing options...
ichan7 Posted May 15, 2017 Share Posted May 15, 2017 I have similar problems with my K95 Platinum and CUE 2.13.80 and its previous release. The problem happens more often in SLI mode. When the problem strake, the keyboard and my Corsair M65 PRO stopped working with all lighting off. Link to comment Share on other sites More sharing options...
floxigen Posted May 15, 2017 Share Posted May 15, 2017 - System - Provider [ Name] Windows Error Reporting - EventID 1001 [ Qualifiers] 0 Level 4 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2017-05-15T17:48:55.284208400Z EventRecordID 132040 Channel Application Computer FloxigenFixe Security - EventData 0 AppHangTransient Non disponible 0 Steam.exe 3.92.72.58 58ffd1bf unknown unknown unknown unknown 0 beae2231-3996-11e7-a528-c8d3a3f4395b 2049 iT4S It's the event report I get if it can help What's strange is that I don't have the issue if I use it on my laptop ! It must be a conflict with something Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted May 16, 2017 Corsair Employee Share Posted May 16, 2017 It is an annoying issue but we have a lot of the boards you're all reporting and we've tried all types of combinations to no avail. It honestly started after Steam updated the client for the PS4 controller support but its sporadic even if the hardware was replicated. I can't fix it unless I have a system that it can be reproduced on. Link to comment Share on other sites More sharing options...
Xploder270 Posted May 19, 2017 Share Posted May 19, 2017 I can't fix it unless I have a system that it can be reproduced on. Is there any info we can provide to help with this? Link to comment Share on other sites More sharing options...
floxigen Posted May 20, 2017 Share Posted May 20, 2017 Yes maybe we can reproduce the bug for you don't you think ? Link to comment Share on other sites More sharing options...
floxigen Posted May 20, 2017 Share Posted May 20, 2017 2017-05-20T07:52:41 I cue.init: CUE version: 2.13.80 2017-05-20T07:52:41 I cue.init: Updates server: https://www3.corsair.com/software/CUE_V2/ 2017-05-20T07:52:41 I cue.init: Build type: Public Release 2017-05-20T07:52:41 I cue.init: Applicaiton ID: 13060 2017-05-20T07:52:42 I cue.init.font: Using Regular text font family: "Open Sans" 2017-05-20T07:52:42 I cue.init.font: Using Title text font family: "Gotham Bold" 2017-05-20T07:52:42 I cue.session: Locked changed to false 2017-05-20T07:52:42 I cue.session.win: Will notify 'connected changed to' with delay 2017-05-20T07:52:42 I cue.session: Local changed to true 2017-05-20T07:52:42 I cue.profiles.folders.tree: Profile order deserialization started: "C:\\Users\\floxi\\AppData\\Roaming/Corsair/CUE/profiles/tree.cueprofileorder" 2017-05-20T07:52:42 W cue.profiles.folders.tree: Could not detect cereal root node - likely due to empty or invalid input 2017-05-20T07:52:42 I cue.profiles.folders.tree: Profile order deserialization finished: "C:\\Users\\floxi\\AppData\\Roaming/Corsair/CUE/profiles/tree.cueprofileorder" 2017-05-20T07:52:42 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input 2017-05-20T07:52:42 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input 2017-05-20T07:52:42 W cue.library: Actions load failed: Could not detect cereal root node - likely due to empty or invalid input 2017-05-20T07:52:42 I cue.action.macro.win: Init time: 0.401916 (init: 2.43e-07 reset: 0.00149894 ) 2017-05-20T07:52:43 I cue.session: Connected changed to true 2017-05-20T07:52:43 I cue.dev: Requesting working state enter because session connected. 2017-05-20T07:52:43 I cue.dev.enum.hid: Entering working state. 2017-05-20T07:52:43 I cue.sdk: Entering working state, session connected. 2017-05-20T07:52:43 I cue.sdk: Starting router. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,49714) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c232 not found. 2017-05-20T07:52:43 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-05-20T07:52:43 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:52:43 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-05-20T07:52:43 I cue.dev: Initializing STRAFE RGB... 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,49713) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c231 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:52:43 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-05-20T07:52:43 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-05-20T07:52:43 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-05-20T07:52:43 I cue.lightings.player: Started lighting worker in 0x2e58 2017-05-20T07:52:44 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-05-20T07:52:45 W QFSFileEngine::open: No file name specified 2017-05-20T07:52:45 C cue.download.fw: Aborting idle process not supported. 2017-05-20T07:52:45 W QFile::remove: Empty or null file name 2017-05-20T07:52:57 I cue.init.ui: Starting UI. 2017-05-20T07:52:57 W cue.thread: Can't rename main thread. 2017-05-20T07:52:58 W MainWindow_QMLTYPE_338(0x14aad618) must be a top level window. 2017-05-20T07:52:58 W MainWindow_QMLTYPE_338(0x14aad618) must be a top level window. 2017-05-20T07:52:58 W qrc:/qml/ui/accordion/LibraryPropertyViewsAccordionItem.qml:453:12: QML LibraryPropertyViewsAccordionItemToolbar: Binding loop detected for property "applyFromLibraryEnabled" 2017-05-20T07:53:00 W libpng warning: iCCP: known incorrect sRGB profile 2017-05-20T07:53:00 W libpng warning: iCCP: cHRM chunk does not match sRGB 2017-05-20T07:53:06 W qrc:/qml/ui/MainScreen.qml:2823: TypeError: Type error 2017-05-20T07:53:06 W qrc:/qml/collection/SlidingTabView.qml:135: TypeError: Cannot read property 'iconSource' of undefined 2017-05-20T07:53:06 W qrc:/qml/collection/SlidingTabView.qml:123: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:53:06 W qrc:/qml/collection/SlidingTabView.qml:126: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:53:06 W qrc:/qml/collection/SlidingTabView.qml:84: TypeError: Cannot read property 'title' of null 2017-05-20T07:53:12 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 31. 2017-05-20T07:53:12 I cue.lightings.player: Stopped lighting worker in 0x2e58 2017-05-20T07:53:12 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:53:12 C cue.dev: Result added after end of transaction 2017-05-20T07:53:12 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-05-20T07:53:13 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:53:13 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:53:13 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:53:13 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:53:13 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:53:13 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:53:15 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-05-20T07:53:15 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:53:15 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:53:15 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-05-20T07:53:15 I cue.dev: Initializing STRAFE RGB... 2017-05-20T07:53:15 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:53:15 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:53:15 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-05-20T07:53:15 I cue.lightings.player: Started lighting worker in 0x29b4 2017-05-20T07:53:15 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-05-20T07:53:16 W QFSFileEngine::open: No file name specified 2017-05-20T07:53:16 C cue.download.fw: Aborting idle process not supported. 2017-05-20T07:53:16 W QFile::remove: Empty or null file name 2017-05-20T07:53:20 W qrc:/qml/collection/SlidingTabView.qml:135: TypeError: Cannot read property 'iconSource' of undefined 2017-05-20T07:53:20 W qrc:/qml/collection/SlidingTabView.qml:123: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:53:20 W qrc:/qml/collection/SlidingTabView.qml:126: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:53:20 W qrc:/qml/collection/SlidingTabView.qml:84: TypeError: Cannot read property 'title' of null 2017-05-20T07:53:20 I cue.init.ui: Trimming cache. 2017-05-20T07:54:14 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:54:14 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:54:14 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:54:14 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:54:14 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:54:14 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:54:14 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:54:14 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:54:14 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:54:14 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:54:14 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:54:14 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:54:14 I cue.dev: Buffer apply for Red failed. request timed out for STRAFE RGB 2017-05-20T07:54:28 W MainWindow_QMLTYPE_667(0x1c82be58) must be a top level window. 2017-05-20T07:54:28 W MainWindow_QMLTYPE_667(0x1c82be58) must be a top level window. 2017-05-20T07:54:28 W qrc:/qml/ui/accordion/LibraryPropertyViewsAccordionItem.qml:453:12: QML LibraryPropertyViewsAccordionItemToolbar: Binding loop detected for property "applyFromLibraryEnabled" 2017-05-20T07:54:28 W libpng warning: iCCP: known incorrect sRGB profile 2017-05-20T07:54:28 W libpng warning: iCCP: cHRM chunk does not match sRGB 2017-05-20T07:54:29 I cue.init.ui: Starting UI. 2017-05-20T07:54:29 W qrc:/qml/collection/DeviceViewCarousel.qml:68:18: Unable to assign bool to QUrl 2017-05-20T07:54:35 W qrc:/qml/ui/MainScreen.qml:2823: TypeError: Type error 2017-05-20T07:54:35 W qrc:/qml/collection/SlidingTabView.qml:135: TypeError: Cannot read property 'iconSource' of undefined 2017-05-20T07:54:35 W qrc:/qml/collection/SlidingTabView.qml:123: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:54:35 W qrc:/qml/collection/SlidingTabView.qml:126: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:54:35 W qrc:/qml/collection/SlidingTabView.qml:84: TypeError: Cannot read property 'title' of null 2017-05-20T07:54:35 W QFSFileEngine::open: No file name specified 2017-05-20T07:54:36 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) expandOne (qrc:/qml/collection/Accordion.qml:78) onItemClicked (qrc:/qml/collection/Accordion.qml:123) (qrc:/qml/collection/Accordion.qml:166) onClicked (qrc:/qml/ui/accordion/ProfilesAccordionItem.qml:61) onClicked (qrc:/qml/delegate/CurrentProfileDelegate.qml:132) 2017-05-20T07:54:37 W QFSFileEngine::open: No file name specified 2017-05-20T07:54:38 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) expandOne (qrc:/qml/collection/Accordion.qml:78) onItemClicked (qrc:/qml/collection/Accordion.qml:123) (qrc:/qml/collection/Accordion.qml:166) onClicked (qrc:/qml/ui/accordion/ProfilesAccordionItem.qml:61) onClicked (qrc:/qml/delegate/CurrentProfileDelegate.qml:132) 2017-05-20T07:54:49 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) collapseAll (qrc:/qml/collection/Accordion.qml:102) collapseAccordionItems (qrc:/qml/ui/LeftPanel.qml:70) onEntered (qrc:/qml/ui/MainScreen.qml:2802) onSettigsButtonClicked (qrc:/qml/ui/MainScreen.qml:700) onClicked (qrc:/qml/ui/Header.qml:195) onClicked (qrc:/qml/styled/CueButton.qml:66) expression for onTriggered (qrc:///QtQuick/Controls/Private/BasicButton.qml:164) onReleased (qrc:///QtQuick/Controls/Private/BasicButton.qml:201) 2017-05-20T07:54:53 W qrc:/qml/ui/MainScreen.qml:2823: TypeError: Type error 2017-05-20T07:54:53 W qrc:/qml/collection/SlidingTabView.qml:135: TypeError: Cannot read property 'iconSource' of undefined 2017-05-20T07:54:53 W qrc:/qml/collection/SlidingTabView.qml:123: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:54:53 W qrc:/qml/collection/SlidingTabView.qml:126: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:54:53 W qrc:/qml/collection/SlidingTabView.qml:84: TypeError: Cannot read property 'title' of null 2017-05-20T07:54:57 W QFSFileEngine::open: No file name specified 2017-05-20T07:54:57 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) expandOne (qrc:/qml/collection/Accordion.qml:78) onItemClicked (qrc:/qml/collection/Accordion.qml:123) (qrc:/qml/collection/Accordion.qml:166) onClicked (qrc:/qml/ui/accordion/ProfilesAccordionItem.qml:61) onClicked (qrc:/qml/delegate/CurrentProfileDelegate.qml:132) 2017-05-20T07:55:05 W QFSFileEngine::open: No file name specified 2017-05-20T07:55:06 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) expandOne (qrc:/qml/collection/Accordion.qml:78) onItemClicked (qrc:/qml/collection/Accordion.qml:123) (qrc:/qml/collection/Accordion.qml:166) onClicked (qrc:/qml/ui/accordion/ProfilesAccordionItem.qml:61) onClicked (qrc:/qml/delegate/CurrentProfileDelegate.qml:132) 2017-05-20T07:55:13 W QFSFileEngine::open: No file name specified 2017-05-20T07:55:14 W libpng warning: iCCP: known incorrect sRGB profile 2017-05-20T07:55:14 W libpng warning: iCCP: cHRM chunk does not match sRGB 2017-05-20T07:55:16 W QObject::connect: invalid null parameter 2017-05-20T07:55:34 W QObject::connect: invalid null parameter 2017-05-20T07:55:37 W cue.dev.nxp: Coordinate for key 69 is not found 2017-05-20T07:55:37 W cue.dev.nxp: Coordinate for key 69 is not found 2017-05-20T07:55:37 W cue.dev.nxp: Coordinate for key 69 is not found 2017-05-20T07:55:43 W cue.dev.nxp: Coordinate for key 69 is not found 2017-05-20T07:55:43 W cue.dev.nxp: Coordinate for key 69 is not found 2017-05-20T07:55:43 W cue.dev.nxp: Coordinate for key 69 is not found 2017-05-20T07:55:44 I cue.init.ui: Trimming cache. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:55:57 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:55:57 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:05 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:56:05 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:56:05 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:56:05 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:56:05 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:56:05 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:56:05 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:56:05 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:56:05 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:56:05 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:56:05 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-05-20T07:56:05 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:22 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-05-20T07:56:22 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-05-20T07:56:38 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-05-20T07:56:38 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:56:38 I cue.lightings.player: Stopped lighting worker in 0x29b4 2017-05-20T07:56:38 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:56:38 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-05-20T07:56:38 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:56:38 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-05-20T07:56:38 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:56:38 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-05-20T07:56:38 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:56:38 C cue.dev: Result added after end of transaction 2017-05-20T07:56:38 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-05-20T07:56:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:40 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-05-20T07:56:40 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:56:40 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:56:40 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-05-20T07:56:40 I cue.dev: Initializing STRAFE RGB... 2017-05-20T07:56:40 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:56:40 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:56:40 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-05-20T07:56:41 I cue.lightings.player: Started lighting worker in 0x1bec 2017-05-20T07:56:41 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-05-20T07:56:41 W QFSFileEngine::open: No file name specified 2017-05-20T07:56:41 C cue.download.fw: Aborting idle process not supported. 2017-05-20T07:56:41 W QFile::remove: Empty or null file name 2017-05-20T07:56:45 W MainWindow_QMLTYPE_1018(0x1eff4b08) must be a top level window. 2017-05-20T07:56:45 W MainWindow_QMLTYPE_1018(0x1eff4b08) must be a top level window. 2017-05-20T07:56:45 W qrc:/qml/ui/accordion/LibraryPropertyViewsAccordionItem.qml:453:12: QML LibraryPropertyViewsAccordionItemToolbar: Binding loop detected for property "applyFromLibraryEnabled" 2017-05-20T07:56:45 W libpng warning: iCCP: known incorrect sRGB profile 2017-05-20T07:56:45 W libpng warning: iCCP: cHRM chunk does not match sRGB 2017-05-20T07:56:45 I cue.init.ui: Starting UI. 2017-05-20T07:56:46 W qrc:/qml/collection/DeviceViewCarousel.qml:68:18: Unable to assign bool to QUrl 2017-05-20T07:56:47 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) expandOne (qrc:/qml/collection/Accordion.qml:78) onItemClicked (qrc:/qml/collection/Accordion.qml:123) (qrc:/qml/collection/Accordion.qml:166) onClicked (qrc:/qml/ui/accordion/ProfilesAccordionItem.qml:61) onClicked (qrc:/qml/delegate/CurrentProfileDelegate.qml:132) 2017-05-20T07:56:49 C Nothing to save __editorSave (qrc:/qml/ui/MainScreen.qml:353) expression for onExpandedChanged (qrc:/qml/ui/MainScreen.qml:1846) collapseAll (qrc:/qml/collection/Accordion.qml:102) collapseAccordionItems (qrc:/qml/ui/LeftPanel.qml:70) onEntered (qrc:/qml/ui/MainScreen.qml:2802) onSettigsButtonClicked (qrc:/qml/ui/MainScreen.qml:700) onClicked (qrc:/qml/ui/Header.qml:195) onClicked (qrc:/qml/styled/CueButton.qml:66) expression for onTriggered (qrc:///QtQuick/Controls/Private/BasicButton.qml:164) onReleased (qrc:///QtQuick/Controls/Private/BasicButton.qml:201) 2017-05-20T07:56:52 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-05-20T07:56:52 I cue.lightings.player: Stopped lighting worker in 0x1bec 2017-05-20T07:56:52 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-05-20T07:56:52 C cue.dev: Result added after end of transaction 2017-05-20T07:56:52 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-05-20T07:56:53 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:53 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:53 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:53 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:53 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:53 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-05-20T07:56:54 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-05-20T07:56:55 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:56:55 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-05-20T07:56:55 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-05-20T07:56:55 I cue.dev: Initializing STRAFE RGB... 2017-05-20T07:56:55 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:56:55 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-05-20T07:56:55 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-05-20T07:56:55 I cue.lightings.player: Started lighting worker in 0x3a74 2017-05-20T07:56:55 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-05-20T07:56:55 W QFSFileEngine::open: No file name specified 2017-05-20T07:56:55 C cue.download.fw: Aborting idle process not supported. 2017-05-20T07:56:55 W QFile::remove: Empty or null file name 2017-05-20T07:57:08 I cue.sdk: Stopping router. 2017-05-20T07:57:10 W qrc:/qml/collection/SlidingTabView.qml:135: TypeError: Cannot read property 'iconSource' of undefined 2017-05-20T07:57:10 W qrc:/qml/collection/SlidingTabView.qml:123: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:57:10 W qrc:/qml/collection/SlidingTabView.qml:126: TypeError: Cannot read property 'enabled' of undefined 2017-05-20T07:57:10 W qrc:/qml/collection/SlidingTabView.qml:84: TypeError: Cannot read property 'title' of null 2017-05-20T07:57:10 I cue.init.ui: Trimming cache. Here is a cue log during crash hope it helps Link to comment Share on other sites More sharing options...
floxigen Posted May 23, 2017 Share Posted May 23, 2017 For everyone, I just fixed it buy updating my " asmedia usb 3.0 " drivers Link to comment Share on other sites More sharing options...
Inheritance Posted May 24, 2017 Share Posted May 24, 2017 Is there any info we can provide to help with this? Yes maybe we can reproduce the bug for you don't you think ? If you haven't already provided your full system specs. And logs CUE generates. You can upload them here in a zip file. Also check for BIOS, chipset, and USB controller driver updates. A lot of the time the problem happens way before CUE or the keyboard is involved. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted May 24, 2017 Corsair Employee Share Posted May 24, 2017 Do you guys see any additional files in your event viewer that indicates why it crashed? Link to comment Share on other sites More sharing options...
Xploder270 Posted May 24, 2017 Share Posted May 24, 2017 For everyone, I just fixed it buy updating my " asmedia usb 3.0 " drivers I only have an ASMedia 3.1 controller but I just updated the drivers on that aswell. So far so good! Link to comment Share on other sites More sharing options...
Corsair Employee Corsair James Posted May 25, 2017 Corsair Employee Share Posted May 25, 2017 Great! I figured its most likely a hardware or unrelated issue to CUE but there are always exceptions Im sure. Link to comment Share on other sites More sharing options...
floxigen Posted May 25, 2017 Share Posted May 25, 2017 I only have an ASMedia 3.1 controller but I just updated the drivers on that aswell. So far so good! Yeah it's the same for me ! 3.1 but since I've updated it no more hangs I'm so happy Link to comment Share on other sites More sharing options...
Xploder270 Posted May 26, 2017 Share Posted May 26, 2017 It happened again for me today :/ The USB-Gamecontroller windows thing won't even open. Link to comment Share on other sites More sharing options...
CCFAN Posted May 31, 2017 Share Posted May 31, 2017 I don't have this problem on my system. I'm using a laptop. Link to comment Share on other sites More sharing options...
floxigen Posted June 1, 2017 Share Posted June 1, 2017 Plugging my mouse just triggered it again :( Link to comment Share on other sites More sharing options...
Steeplechase Posted June 7, 2017 Share Posted June 7, 2017 I am noticing this too and it happens whenever my capslock light won't come on. I'll hit the key and it won't respond. I have to get up and unplug the board and replug it. This then freezes steam and locks it up. It only locks up steam. But me having to get up and replug the board soemtimes multiple tilmes a day, is maddening:mad: I have also noticed that if the issue is going on and I boot or reboot Steam without unplugging the board, it will lock up. There's definitely something going on somewhere and it's beginning to wear on me. I have a Corsair Lux K70 RGB. Link to comment Share on other sites More sharing options...
Xploder270 Posted June 7, 2017 Share Posted June 7, 2017 Can confirm the caps lock behavior. Also, it doesn't have to be a controller that triggers this. Plugging/Unplugging my VOID from USB can have the same effect. Now I even disabled the ASMedia USB 3.1 controller in my UEFI and that didn't help so it's not an issue with that. Link to comment Share on other sites More sharing options...
floxigen Posted June 7, 2017 Share Posted June 7, 2017 Hey guys I think you're right, the steam crash get triggered by the caps lock crash ! Here is cue log 2017-06-07T11:21:02 I cue.init: CUE version: 2.13.80 2017-06-07T11:21:02 I cue.init: Updates server: https://www3.corsair.com/software/CUE_V2/ 2017-06-07T11:21:02 I cue.init: Build type: Public Release 2017-06-07T11:21:02 I cue.init: Applicaiton ID: 12876 2017-06-07T11:21:02 I cue.init.font: Using Regular text font family: "Open Sans" 2017-06-07T11:21:02 I cue.init.font: Using Title text font family: "Gotham Bold" 2017-06-07T11:21:02 I cue.session: Locked changed to false 2017-06-07T11:21:02 I cue.session.win: Will notify 'connected changed to' with delay 2017-06-07T11:21:02 I cue.session: Local changed to true 2017-06-07T11:21:02 I cue.profiles.folders.tree: Profile order deserialization started: "C:\\Users\\floxi\\AppData\\Roaming/Corsair/CUE/profiles/tree.cueprofileorder" 2017-06-07T11:21:02 I cue.profiles.folders.tree: Profile order deserialization finished: "C:\\Users\\floxi\\AppData\\Roaming/Corsair/CUE/profiles/tree.cueprofileorder" 2017-06-07T11:21:02 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input 2017-06-07T11:21:02 W cue.library: Lightings load failed: Could not detect cereal root node - likely due to empty or invalid input 2017-06-07T11:21:02 W cue.library: Actions load failed: Could not detect cereal root node - likely due to empty or invalid input 2017-06-07T11:21:03 I cue.action.macro.win: Init time: 0.401965 (init: 0 reset: 0.00154966 ) 2017-06-07T11:21:03 I cue.session: Connected changed to true 2017-06-07T11:21:03 I cue.dev: Requesting working state enter because session connected. 2017-06-07T11:21:03 I cue.dev.enum.hid: Entering working state. 2017-06-07T11:21:03 I cue.sdk: Entering working state, session connected. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,49714) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c232 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:21:03 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:21:03 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:21:03 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,49713) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c231 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(4794,52) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=12ba pid=34 not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50475) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c52b not found. 2017-06-07T11:21:03 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:21:03 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:21:03 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:21:03 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:21:03 I cue.lightings.player: Started lighting worker in 0x342c 2017-06-07T11:21:04 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:21:05 I cue.dev: Buffer apply for Blue failed. request timed out for STRAFE RGB 2017-06-07T11:21:05 I cue.dev: Buffer apply for Blue failed. Device : STRAFE RGB, Execution result = 0, result = 0, platform error code = 995. 2017-06-07T11:21:05 W QFSFileEngine::open: No file name specified 2017-06-07T11:21:05 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:21:05 W QFile::remove: Empty or null file name 2017-06-07T11:21:05 I cue.dev: Buffer write, 1. failed. request timed out for STRAFE RGB 2017-06-07T11:21:05 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 0, result = 0, platform error code = 995. 2017-06-07T11:21:06 I cue.dev: Buffer write, 1. failed. request timed out for STRAFE RGB 2017-06-07T11:21:06 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 0, result = 0, platform error code = 995. 2017-06-07T11:21:06 I cue.dev: Buffer apply for Green failed. request timed out for STRAFE RGB 2017-06-07T11:21:06 I cue.dev: Buffer apply for Green failed. Device : STRAFE RGB, Execution result = 0, result = 0, platform error code = 995. 2017-06-07T11:22:07 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:07 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:07 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:07 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:07 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:07 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:07 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:07 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:07 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:07 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:07 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:07 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:12 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:12 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:12 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:12 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:12 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:12 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:12 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:12 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:12 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:12 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:12 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:22:12 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:18 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:22:18 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:22:24 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 995. 2017-06-07T11:22:24 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:22:24 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:22:24 I cue.lightings.player: Stopped lighting worker in 0x342c 2017-06-07T11:22:24 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:22:24 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:22:24 C cue.dev: Result added after end of transaction 2017-06-07T11:22:24 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-06-07T11:22:26 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:26 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:26 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:26 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:26 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:26 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:27 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:22:27 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:22:27 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:22:27 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:22:27 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:22:27 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:22:27 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:22:27 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:22:28 I cue.lightings.player: Started lighting worker in 0x924 2017-06-07T11:22:28 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:22:29 W QFSFileEngine::open: No file name specified 2017-06-07T11:22:29 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:22:29 W QFile::remove: Empty or null file name 2017-06-07T11:22:39 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:22:39 I cue.lightings.player: Stopped lighting worker in 0x924 2017-06-07T11:22:39 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:22:39 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:22:39 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:22:39 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:22:39 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:22:39 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:22:39 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:22:39 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:22:39 C cue.dev: Result added after end of transaction 2017-06-07T11:22:39 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-06-07T11:22:42 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:42 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:42 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:42 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:42 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:42 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:22:43 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:22:43 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:22:43 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:22:43 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:22:43 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:22:43 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:22:43 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:22:43 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:22:43 I cue.lightings.player: Started lighting worker in 0x3dd8 2017-06-07T11:22:43 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:22:44 W QFSFileEngine::open: No file name specified 2017-06-07T11:22:44 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:22:44 W QFile::remove: Empty or null file name 2017-06-07T11:24:01 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:24:01 I cue.lightings.player: Stopped lighting worker in 0x3dd8 2017-06-07T11:24:01 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:01 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:01 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:01 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:01 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:01 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:01 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:01 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:01 C cue.dev: Result added after end of transaction 2017-06-07T11:24:01 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-06-07T11:24:04 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:04 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:04 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:04 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:04 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:04 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:05 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:24:05 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:24:05 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:24:05 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:24:05 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:24:05 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:24:05 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:24:05 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:24:05 I cue.lightings.player: Started lighting worker in 0x338c 2017-06-07T11:24:05 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:24:06 W QFSFileEngine::open: No file name specified 2017-06-07T11:24:06 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:24:06 W QFile::remove: Empty or null file name 2017-06-07T11:24:33 I cue.lightings.player: Stopped lighting worker in 0x338c 2017-06-07T11:24:33 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:33 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:33 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:33 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:33 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:33 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:33 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:33 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:33 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:33 C cue.dev: Result added after end of transaction 2017-06-07T11:24:33 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-06-07T11:24:38 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:38 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:38 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:38 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:38 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:38 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:39 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:24:39 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:24:39 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:24:39 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:24:39 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:24:39 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:24:39 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:24:39 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:24:39 I cue.lightings.player: Started lighting worker in 0x3e9c 2017-06-07T11:24:39 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:24:40 W QFSFileEngine::open: No file name specified 2017-06-07T11:24:40 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:24:40 W QFile::remove: Empty or null file name 2017-06-07T11:24:51 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:24:51 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:24:51 I cue.lightings.player: Stopped lighting worker in 0x3e9c 2017-06-07T11:24:51 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:51 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:51 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:51 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:51 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:51 I cue.dev: Fail counter for STRAFE RGB reached zero, setting status 3. 2017-06-07T11:24:51 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:24:51 C cue.dev: Result added after end of transaction 2017-06-07T11:24:51 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-06-07T11:24:52 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:52 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:52 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:52 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:52 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:52 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:24:53 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:24:53 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:24:53 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:24:53 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:24:53 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:24:53 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:24:53 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:24:53 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:24:53 I cue.dev: Get win lock failed. request timed out for STRAFE RGB 2017-06-07T11:24:53 I cue.dev: Get win lock failed. Device : STRAFE RGB, Execution result = 0, result = 0, platform error code = 995. 2017-06-07T11:24:53 I cue.lightings.player: Started lighting worker in 0x3ec8 2017-06-07T11:24:53 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:24:54 I cue.dev: Buffer write, 1. failed. request timed out for STRAFE RGB 2017-06-07T11:24:54 W QFSFileEngine::open: No file name specified 2017-06-07T11:24:54 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:24:54 W QFile::remove: Empty or null file name 2017-06-07T11:25:01 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:25:01 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:25:01 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:25:01 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:25:01 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:25:01 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:25:01 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:25:01 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:25:01 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:25:01 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:25:01 C dev.manifest: Cannot find path for manifest key QPair(1133,49282) 2017-06-07T11:25:01 I cue.dev: Manifest for device vid=46d pid=c082 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:15 C dev.manifest: Cannot find path for manifest key QPair(1133,50489) 2017-06-07T11:25:15 I cue.dev: Manifest for device vid=46d pid=c539 not found. 2017-06-07T11:25:36 I cue.dev: Buffer write, 1. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 2. 2017-06-07T11:25:36 I cue.lightings.player: Stopped lighting worker in 0x3ec8 2017-06-07T11:25:36 I cue.dev: Buffer write, 2. failed. Device : STRAFE RGB, Execution result = 1, result = 0, platform error code = 1167. 2017-06-07T11:25:36 C cue.dev: Result added after end of transaction 2017-06-07T11:25:36 W cue.dev: Device "STRAFE RGB" worker thread has stopped 2017-06-07T11:25:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:25:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:25:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:25:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:25:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:25:39 I cue.dev: Device vid=1b1c pid=1b20 is marked 'slow startup'. 2017-06-07T11:25:40 I cue.dev: Created new device object: STRAFE RGB; ready: 0 2017-06-07T11:25:40 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:25:40 I cue.dev: Attached to device object STRAFE RGB: b=0 a=0 2017-06-07T11:25:40 I cue.dev: Attached to device object STRAFE RGB: b=0 a=1 2017-06-07T11:25:40 I cue.dev: Initializing STRAFE RGB... 2017-06-07T11:25:40 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_00#7&1bfc3646&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:25:40 I cue.dev: Failed to open device: vid=1b1c pid=1b20 path=\\?\hid#vid_1b1c&pid_1b20&mi_01&col01#7&2f2c5284&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 2017-06-07T11:25:40 I cue.dev: Initialized (st=1) STRAFE RGB. 2017-06-07T11:25:40 I cue.lightings.player: Started lighting worker in 0x3874 2017-06-07T11:25:40 I cue.dev: Device insertion processing complete for STRAFE RGB. 2017-06-07T11:25:41 W QFSFileEngine::open: No file name specified 2017-06-07T11:25:41 C cue.download.fw: Aborting idle process not supported. 2017-06-07T11:25:41 W QFile::remove: Empty or null file name Plz fix this caps lock crash and then we will be all right ! Link to comment Share on other sites More sharing options...
floxigen Posted June 7, 2017 Share Posted June 7, 2017 Well, I have now unplugged the usb cord with the usb symbol on it, and plugged in the one with the keyboard on it in an other ports, 3.0, and now I can't trigger led bug again, thus it's not crashing steam, now wait and see Link to comment Share on other sites More sharing options...
Xploder270 Posted June 7, 2017 Share Posted June 7, 2017 Well, I have now unplugged the usb cord with the usb symbol on it, and plugged in the one with the keyboard on it in an other ports, 3.0, and now I can't trigger led bug again, thus it's not crashing steam, now wait and see Nah that won't make a difference. The USB symbol cord is just a passthrough to the back USB ports on the keyboard. Just had it happen again. I unplugged my VOID from charging it, steam freezes and the Capslock/Numlock LEDs on the strafe become unresponsive. Link to comment Share on other sites More sharing options...
floxigen Posted June 7, 2017 Share Posted June 7, 2017 The thing is what triggering steam freeze here is caps lock crash. When it's not crashed I can plug and unplug as many time I want my Logitech mouse it won't crash. This being said, in some USB configuration, on some USB ports, caps lock WILL crash if I spam caps lock key. I plugged in my keyboard with only one USB cord in a USB 3 hub and it won't trigger the crash if I spam the key. Really give it a try I'm pretty sure it's a powder thing and thus, too many power will crash the keyboard cpu Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.