mirkoj Posted May 4, 2019 Share Posted May 4, 2019 Hi, I know that htere is no corsair link for linux but I was wondering if there is any other proper way to at least control radiator fan speed under linux? Thanks Link to comment Share on other sites More sharing options...
DevBiker Posted May 4, 2019 Share Posted May 4, 2019 The only thing that you can really do is to connect the cooler via USB to a Windows machine with Link or iCUE, set your fan curves and save to the device. Note that some coolers don't require a separate "Save" to save the settings to the cooler. Link to comment Share on other sites More sharing options...
mirkoj Posted May 4, 2019 Author Share Posted May 4, 2019 I do have win10 on another disk on the same machine as well. And I have preferences saved and curve and all but it doesn't seems to be working under linux at all. So in theory what I setup on windows boot it should be saved on cooler and run even without corsair link anyway under linux? And if so why fans are not ramping up, which they do when I boot into windows :) Link to comment Share on other sites More sharing options...
mirkoj Posted July 22, 2019 Author Share Posted July 22, 2019 This doesn't seems to work :( Same machine, dual boot windows10 and linux. Setup all on windows. reboot to linux, fans are not reacting anymore. CPU goes to 90 when encoding or similar but fans are not increasing at all. Link to comment Share on other sites More sharing options...
DevBiker Posted July 22, 2019 Share Posted July 22, 2019 Which cooler are you using? Link to comment Share on other sites More sharing options...
mirkoj Posted July 22, 2019 Author Share Posted July 22, 2019 It is H115i pro Link to comment Share on other sites More sharing options...
DevBiker Posted July 23, 2019 Share Posted July 23, 2019 You need to specifically save the profile to the device with that cooler, if I recall correctly. It's hidden away - a little "SD Card" icon at the top of the Performance section, off the "hamburger" menu. Link to comment Share on other sites More sharing options...
Recommended Posts