Jump to content
Corsair Community

corsair liquid coolers and linux


mirkoj
 Share

Recommended Posts

The only thing that you can really do is to connect the cooler via USB to a Windows machine with Link or iCUE, set your fan curves and save to the device. Note that some coolers don't require a separate "Save" to save the settings to the cooler.
Link to comment
Share on other sites

I do have win10 on another disk on the same machine as well.

And I have preferences saved and curve and all but it doesn't seems to be working under linux at all.

So in theory what I setup on windows boot it should be saved on cooler and run even without corsair link anyway under linux?

And if so why fans are not ramping up, which they do when I boot into windows :)

Link to comment
Share on other sites

  • 2 months later...

This doesn't seems to work :(

Same machine, dual boot windows10 and linux.

Setup all on windows. reboot to linux, fans are not reacting anymore.

CPU goes to 90 when encoding or similar but fans are not increasing at all.

Link to comment
Share on other sites

 Share

×
×
  • Create New...