slickwhits Posted June 22, 2016 Share Posted June 22, 2016 Hey guys, So i recieved my shiny new Corsair Lapdog, m65 pro mouse and K70 LUX RGB keyboard today. I initially hooked up the new keyboard and mouse to my pc without the lapdog and everything was fine. I was able to use CUE to set lighting profiles and I was very pleased. I then added the components to the lapdog but now I am unable to change settings on CUE as both the mouse and keyboard are appearing as "device malfunction". I have updated firmware to the latest version for both devices and have restarted the pc several times. Both devices are currently working. Its just the CUE side of things that isnt working. Any help would be great, cheers :p: Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Alan Posted June 23, 2016 Corsair Employee Share Posted June 23, 2016 Hi slickwhits, Did you plug the lapdog's USB into a native USB 3.0 port? Not ASmedia or VIA Labs And just to confirm can you tell me what FW you have on your devices? Let me know what are your results. Link to comment Share on other sites More sharing options...
slickwhits Posted June 28, 2016 Author Share Posted June 28, 2016 Hi Alan, Thanks for getting back to me. Yes, the lapdog is plugged into a native usb 3.1 port on the rear of the motherboard. As for the firmware, I am running the following: K70 Lux RGB - firmware version - 2.05 M65 Pro RGB - firmware version - 2.02 Corsair Link software version - 1.16.42 I have tried plugging it into various usb ports, forcing firmware updates and yet the problem still persists. I have actually noticed the mouse and keyboard becoming unresponsive at times also. It is worth noting that I have Razer Synapse program also installed and another keyboard and mouse plugged in simultaneously. This shouldn't be a problem though should it? I look forward to hearing from you, cheers Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Alan Posted June 30, 2016 Corsair Employee Share Posted June 30, 2016 Hi slickwhits, Let me recreate this scenario and get back to you with the result. Have you tried running the setup without Synapse running in the background? Can you also tell me which motherboard you are using? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.