ntl Posted September 6, 2018 Share Posted September 6, 2018 Hi guys, I'm very new to Corsair, and back to building desktop after years so I'm feeling very stupid now... Would you please guide me thru setting up my newly order stuffs below, thanks in advance :) My items: ASUS ROG Maximus X Hero Z370 LGA 1151-2 ATX Motherboard SPEC-OMEGA RGB case Commander Pro 1 x Twin HD140 pack 1 x 3 HD120 pack 1 x single HD120 1 x H115i 1 x LED Lighting PRO Expansion Kit To be honest I'm now lost, don't know how to connect those above toys so I can have a sync'd and centralized software management. My questions are: 1. From my understanding the HD pack comes with a LED Hub, should I connect all Fans' LED and LED Expansion Kit Strip to a Hub , then Hub connect to Commander Pro? 2. The case comes with a NoPro so should I connect it directly to Main's USB? 3. Where should I connect fans' PWM to? Directly to main or to Commander Pro? If to CoPro then how does CoPro get the temp info from? Any help would be very much appreciated :) Link to comment Share on other sites More sharing options...
DevBiker Posted September 6, 2018 Share Posted September 6, 2018 Hey there! I suggest that you give a good read-through of the RGB FAQ that's linked in my signature. That'll address most, if not all, of your questions. Link to comment Share on other sites More sharing options...
Zotty Posted September 6, 2018 Share Posted September 6, 2018 My questions are: 1. From my understanding the HD pack comes with a LED Hub, should I connect all Fans' LED and LED Expansion Kit Strip to a Hub , then Hub connect to Commander Pro? 2. The case comes with a NoPro so should I connect it directly to Main's USB? 3. Where should I connect fans' PWM to? Directly to main or to Commander Pro? If to CoPro then how does CoPro get the temp info from? Any help would be very much appreciated :) Hi Buddy 1 yes you would connect all the HD fans to the RGB Fan LED hub which then in turn connect to your Commander Pro 2 yes Commander Pro and Lighting Node Pro both have a 9pin usb header connection and a sata power Connection. 3 yes they all connect to the Commander pro's Fan headers.. depending on if you use default curves or custom curves depends on Temp source.. in custom curves you have many choices. as already suggested,, have a read of the below thread :) http://forum.corsair.com/v3/showthread.php?t=173880 Link to comment Share on other sites More sharing options...
ntl Posted September 7, 2018 Author Share Posted September 7, 2018 Thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.