xDelx Posted July 31, 2010 Share Posted July 31, 2010 I too have this model and experience the same symptoms with a bsod daily. Symptoms being the SSD will cause a BSOD randomly. Rebooting the machine and the SSD is not detected in BIOS. Manual power off once or even twice will restore the detection and windows will boot up fine. but then randomly bsod sometime throughout the day Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 3, 2010 Corsair Employee Share Posted August 3, 2010 We are looking into this issue but at this time we have not been able to duplicate the issue. I am sending you a PM with more details so please check the message. And directions for getting the drive replaced. Link to comment Share on other sites More sharing options...
Vodalex Posted August 4, 2010 Share Posted August 4, 2010 RAM GUY I had the same issues with the drive. Now I disable TRIM because I had random BSODs . I will test the system and give feedback. Hopefully it runs stable now. I hope there will be firmware updates to solve these BSOD issues. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 4, 2010 Corsair Employee Share Posted August 4, 2010 Can you call in and ask for me I will do my best to help you with this? Link to comment Share on other sites More sharing options...
Vodalex Posted August 4, 2010 Share Posted August 4, 2010 RAM GUY, The system ist stable now with TRIM being disabled. No BSOD's , No crashes of Mozilla Thunderbird, Firefox. Works really well. Hopefully it remains like this. I have no problems with the drive while starting the system and it is recognized well in BIOS. I will keep an eye on it and tell you about any issues, which may occur. Link to comment Share on other sites More sharing options...
Vodalex Posted August 5, 2010 Share Posted August 5, 2010 Well, I just had a BSOD ( BAD POOL CALLER) and TRIM was disabled... It happened after i turned on Bluetooth on my Nokia N73 and Nokia PC Suite tried to connect to the phone. I am really dissapointed about these BSODs. Is there any solution for it? Will you relase firmware updates, which will fix it? I payed 159 € for the product and cannot use it properly... Link to comment Share on other sites More sharing options...
Xenn0X Posted August 5, 2010 Share Posted August 5, 2010 bad pool caller bsod has nothing to do with your ssd. ssd only fails with 0x000000f4 error and kernel power errors. bad pool caller probably came of the drivers for your nokia phone. Link to comment Share on other sites More sharing options...
Vodalex Posted August 5, 2010 Share Posted August 5, 2010 This ist not true. I had no problems with my PC before and all these Bsods started to appear after i installed this ssd. BSODs like ( bad pool caller system service exception memory managment) I am not satisfied with the product. Link to comment Share on other sites More sharing options...
Xenn0X Posted August 5, 2010 Share Posted August 5, 2010 This ist not true. I had no problems with my PC before and all these Bsods started to appear after i installed this ssd. BSODs like ( bad pool caller system service exception memory managment) I am not satisfied with the product. join the club, your not alone. Link to comment Share on other sites More sharing options...
Vodalex Posted August 5, 2010 Share Posted August 5, 2010 Luckily, today is the last day i used it and it goes back to the seller and i will get my money back (hopefully). It was enough for me. Link to comment Share on other sites More sharing options...
Xenn0X Posted August 5, 2010 Share Posted August 5, 2010 try to disable trim and test if it still fails. http://forum.corsair.com/v3/showthread.php?t=86403 Link to comment Share on other sites More sharing options...
BEBER2410 Posted August 5, 2010 Share Posted August 5, 2010 try to disable trim and test if it still fails. http://forum.corsair.com/v3/showthread.php?t=86403 I just try that, and doesn't work for me : in S3 mode, when wake up, seem that SSD never wake up ! must reset and restart windows .. Link to comment Share on other sites More sharing options...
Mummy Posted August 5, 2010 Share Posted August 5, 2010 I just try that, and doesn't work for me : in S3 mode, when wake up, seem that SSD never wake up ! must reset and restart windows .. You mean after wakeup from sleepmode your PC "freeze" or gets BSOD? -If so it seem to be very different issue. If you have Intel Chipset try, 8.6 or 8.9 drivers and not 9.x drivers... Link to comment Share on other sites More sharing options...
Vodalex Posted August 5, 2010 Share Posted August 5, 2010 Well, i have sent the F60 back and i am really happy about it. I hope that Corsair will release some firmware updates, which will make it usable for other users. Link to comment Share on other sites More sharing options...
Pitne Posted August 5, 2010 Share Posted August 5, 2010 I'm curious if I should RMA my new CSSD-F120GB2 or just wait for a possible fix. I'd hate to be stuck with this issue forever. only issue i've experienced so far is the resume sleep bsod Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 5, 2010 Corsair Employee Share Posted August 5, 2010 Just disable Sleep mode and set it to suspend to disk, and yes there will be a solution. Link to comment Share on other sites More sharing options...
Pitne Posted August 5, 2010 Share Posted August 5, 2010 Thanks it is nice to hear that a solution is in the works :) Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 5, 2010 Corsair Employee Share Posted August 5, 2010 NP Please let me know if you have any more questions! Vodalex please go to event Viewer and tell me the event ID and the error description that is logged? Link to comment Share on other sites More sharing options...
xDelx Posted August 6, 2010 Author Share Posted August 6, 2010 "ssd only fails with 0x000000f4 error" These are the errors I receive. I have disabled power management of the SSD in Win 7 and this has greatly improved things. I have only had a BSOD once in the 4 days since I made this change Link to comment Share on other sites More sharing options...
Pitne Posted August 6, 2010 Share Posted August 6, 2010 Update: Even when I use one of my "2 SATA 6Gb/s (SATA7~8) ports by Marvell® 88SE9128" ports, i still BSOD after resuming sleep... just doesnt happen every time arghhhhhhhhhhhhhhh Link to comment Share on other sites More sharing options...
Vodalex Posted August 6, 2010 Share Posted August 6, 2010 RAM GUY Event ID 41 in all cases. Check the enclosed file for more info..errors.zip Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted August 6, 2010 Corsair Employee Share Posted August 6, 2010 It should allow you to save as Plain text or a CSV File. Link to comment Share on other sites More sharing options...
Vodalex Posted August 7, 2010 Share Posted August 7, 2010 Here it is.. I suppose that the problem ist not ssd itself.. 64 Bit operating system migt have caused the problems.. I will also try to use another kit of ram.. I will give feedback to you, RAM GUY. Thank you for your help!bsods.zip Link to comment Share on other sites More sharing options...
jbandersen Posted August 8, 2010 Share Posted August 8, 2010 Here it is.. I suppose that the problem ist not ssd itself.. 64 Bit operating system migt have caused the problems.. I will also try to use another kit of ram.. I will give feedback to you, RAM GUY. Thank you for your help! I have the same problem here with my F60 - BSOD after resume from sleep. Event Viewer says EventId=41. I also own a X128 and have a similar problem with that (also BSOD after resume from sleep, EventId=41). But the X128 also freezes 5 sec now and then (HDD LED is on constant and the screen freezes). Is my best solution to disable TRIM or disable sleep-mode or ? EventLog snapshot: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" /> <EventID>41</EventID> <Version>2</Version> <Level>1</Level> <Task>63</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000002</Keywords> <TimeCreated SystemTime="2010-08-08T01:16:57.847600000Z" /> <EventRecordID>31763</EventRecordID> <Correlation /> <Execution ProcessID="4" ThreadID="8" /> <Channel>System</Channel> <Computer>Win7PackardBell</Computer> <Security UserID="S-1-5-18" /> </System> - <EventData> <Data Name="BugcheckCode">122</Data> <Data Name="BugcheckParameter1">0xfffff6fc400097e0</Data> <Data Name="BugcheckParameter2">0xffffffffc000000e</Data> <Data Name="BugcheckParameter3">0xaab48860</Data> <Data Name="BugcheckParameter4">0xfffff880012fcc7c</Data> <Data Name="SleepInProgress">true</Data> <Data Name="PowerButtonTimestamp">0</Data> </EventData> </Event> Link to comment Share on other sites More sharing options...
biatche Posted August 9, 2010 Share Posted August 9, 2010 100% trim issue. disable it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.